Fracture Mechanics of Ceramics

Volume 13. Crack-Microstructure Interaction, R-Curve Behavior, Environmental Effects in Fracture, and Standardization

  • R. C. Bradt
  • D. Munz
  • M. Sakai
  • V. Ya. Shevchenko
  • K. White

Table of contents

  1. Front Matter
    Pages i-x
  2. V. V. Adishchev, V. M. Kornev, A. G. Demeshkin, M. E. Kozeko
    Pages 83-97
  3. D. J. Green, V. M. Sglavo, E. K. Beauchamp, S. J. Glass
    Pages 99-105
  4. M. Hangl, A. Börger, R. Danzer, H. M. Luxner
    Pages 159-167
  5. T.-J. Chuang, E. R. Fuller Jr.
    Pages 169-178
  6. S. Darzens, G. Boitier, J. L. Chermant, J. Vicens
    Pages 179-191
  7. I. Dlouhý, M. Reinisch, A. R. Boccaccini
    Pages 203-212
  8. G. Fantozzi, J. Chevalier, M. Saâdaoui
    Pages 213-228
  9. S. M. Barinov, N. V. Ivanov, A. V. Kurepin, V. Ya. Shevchenko
    Pages 235-242
  10. A. Förderreuther, G. Thurn, F. Aldinger
    Pages 243-253
  11. M. Anglada, J. Alcalá, R. Fernández, L. Llanes, D. Casellas
    Pages 255-272
  12. M. E. Ebrahimi, J. Chevalier, M. Saadaoui, G. Fantozzi
    Pages 273-286
  13. J. Chevalier, L. Gremillard, R. Zenati, Y. Jorand, C. Olagnon, G. Fantozzi
    Pages 287-303
  14. V. M. Sglavo, D. J. Green
    Pages 305-313
  15. R. D. Geraghty, C. R. Ortiz-Longo, K. W. White
    Pages 315-327
  16. H. Awaji, S. Honda, N. Yamamoto, T. Endo, N. Hirosaki
    Pages 363-379
  17. M. Saâdaoui, J. Chevalier, G. Fantozzi
    Pages 381-393
  18. G. De Maria, D. Ferro, S. Barinov, L. D. Alessio, R. Teghil
    Pages 457-467
  19. M. A. Borik, Yu. K. Voronko, E. E. Lomonova, V. V. Osiko, V. A. Sarin, G. A. Gogotsi
    Pages 485-496
  20. O. L. Khasanov, Yu. P. Pokholkov, Yu. F. Ivanov, L. L. Ljubimova, A. A. Makeev
    Pages 503-512
  21. Z. I. Kormshchikova, Yu. I. Ryabkov, B. A. Goldin
    Pages 513-519
  22. Back Matter
    Pages 521-529

About this book


This Volume 13 of the Fracture Mechanics of Ceramics series constitutes the th Proceedings of the 7 International Symposium on the fracture mechanics of ceramics held at the Presidium of the Russian Academy of Sciences, Moscow, Russia on July 20 to 22, 1999. The series started from the Proceedings of the 1 st Symposium at the Pennsylvania State University that has been held on 1973 (Vols. 1 and 2), followed by 1977 and 1981 Years meetings (Vols. 3 to 6) which were held at the Pennsylvania State University, too. Volumes 7 and 8 are from the 1985 Symposium which was held at the Virginia Polytechnic Institute and State University, Volumes 9 and 10 are from the 1991 Symposium at Japan Fine Ceramic Centre, Nagoya, and Volumes 11 and 12 are from the 1995 Symposium at Kernforschungszentrum, Karlsruhe. The theme of the Symposium was focused on the mechanical behaviour of advanced ceramics in terms of the cracks, particularly the crack-microstructure interaction, delayed failure, environmental effects in fracture. Special attention was paid on the novel methods in fracture mechanics testing, pre-standardisation and standartisation. The authors from 19 countries represented the current state of that field. The International Scientific Committee gratefully acknowledge the sponsoring provided by The Russian Academy of Sciences and, personally, Academician Yu.S.Osipov, President of RAS; The Ministry of Science and Technologies of the Russian Federation, Prof. G.Terestchenko; Russian Foundation for Basic Research, Academician I.Moiseev; Scientific Technical Center "Bacor", Dr. B.Krasnij; Gzhel Ltd., Prof.


Glas ceramics composite deformation fatigue fracture mechanics glass mechanics porous media

Editors and affiliations

  • R. C. Bradt
    • 1
  • D. Munz
    • 2
  • M. Sakai
    • 3
  • V. Ya. Shevchenko
    • 4
  • K. White
    • 5
  1. 1.University of AlabamaTuscaloosaUSA
  2. 2.University of KarlsruheKarlsruheGermany
  3. 3.Toyohashi University of TechnologyToyohashiJapan
  4. 4.Institute of Silicates ChemistryRASSt. PetersburgRussia
  5. 5.University of HoustonHoustonUSA

Bibliographic information

Industry Sectors
Materials & Steel
Chemical Manufacturing
Finance, Business & Banking
Consumer Packaged Goods
Energy, Utilities & Environment
Oil, Gas & Geosciences