Advertisement

Compressor Surge and Rotating Stall

Modeling and Control

  • Jan Tommy Gravdahl
  • Olav Egeland

Part of the Advances in Industrial Control book series (AIC)

Table of contents

  1. Front Matter
    Pages i-xix
  2. Jan Tommy Gravdahl, Olav Egeland
    Pages 1-62
  3. Jan Tommy Gravdahl, Olav Egeland
    Pages 109-119
  4. Jan Tommy Gravdahl, Olav Egeland
    Pages 121-142
  5. Jan Tommy Gravdahl, Olav Egeland
    Pages 177-179
  6. Back Matter
    Pages 181-225

About this book

Introduction

This work gives a comprehensive overview of the achievements in the field of modeling and active control of instabilities in compressions systems over the last decade.

Existing models of unstable compression systems are in most cases restricted to constant speed compressors. Here, two models are derived that take time varying rotational speed into account - one for centrifugal compressors and one for axial compressors.

• The main focus of the modeling element is the inclusion of non-constant speed in existing dynamic models of unstable compression systems, and the study of surge and rotating stall in connection with this.

• The focus of the control element is the use of a close coupled valve as a means of stabilising surge and rotating stall. Little work has yet been published on this.

Using techniques such as backstepping and passivity, controllers for a close coupled valve in the compression system are derived in order to stabilise the compressors and extend the range of mass flows over which it can be operated stably. Detailed analysis of the closed loop systems is performed and many case studies with simulations are presented.

Scientists and graduate students working in this area will find this particularly useful. It will also be a valuable addition to libraries and the industry as a whole.

 

Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Keywords

Axial Compressors Compression Systems Compressor Surge Control Engineering Rotating Stall Turbine actuator calculus control design gas turbine model modeling simulation stability

Authors and affiliations

  • Jan Tommy Gravdahl
    • 1
  • Olav Egeland
    • 1
  1. 1.Department of Engineering CyberneticsNorwegian University of Science and TechnologyTrondheimNorway

Bibliographic information

  • DOI https://doi.org/10.1007/978-1-4471-0827-6
  • Copyright Information Springer-Verlag London 1999
  • Publisher Name Springer, London
  • eBook Packages Springer Book Archive
  • Print ISBN 978-1-4471-1211-2
  • Online ISBN 978-1-4471-0827-6
  • Series Print ISSN 1430-9491
  • Series Online ISSN 2193-1577
  • Buy this book on publisher's site
Industry Sectors
Materials & Steel
Automotive
Chemical Manufacturing
Electronics
Aerospace
Oil, Gas & Geosciences
Engineering