Abstract
This paper presents the results of a simplified analysis of a differential measuring circuit with pulsed supply of the single-coil eddy current sensors connected to the circuit, with approximate differentiation of currents, and with an ADC at the output. The circuit is designed as part of automation systems for tests of gas turbine engines. Methods for eliminating the temperature influences on the sensors using the hardware and software of the measurement system are considered. Using a model of the measuring circuit, we determined the families of conversion functions (dependences of the code on the desired radial and axial displacements) for normal and nominal temperatures and then, from their difference, the families of functions of temperature influence on code changes, which characterize possible errors. Quantitative estimates of the maximum values of the influence functions were obtained which confirm the efficiency of the proposed methods.
Similar content being viewed by others
References
S. Yu. Borovik, M. M. Kuteynikova, B. K. Raykov, et al., “Method for Measuring Radial and Axial Displacements of Complex-Shaped Blade Tips,” Avtometriya 51 (3), 104–112 (2015) [Optoelectron., Instrum. Data Process. 51 (3), 302–3092 (2015)].
Methods and Tools for Measuring Multidimensional Movements of Power Plant Components, Ed. by Yu. N. Sekisova and O. P. Skobelev (Samara Scientific Center, Samara, 2001) [in Russian].
V. G. Gerasimov, V. V. Klyuev, and V. E. Shaternikov, Methods and Devices of Electromagnetic Control (Spektrum, Moscow, 2010) [in Russian].
Eddy Current Testing at Level 2: Manual for the Syllabi Contained in IAEA-TECDOC-628. Rev. 2 Training Guidelines for Non Destructive Testing Techniques, Training Course Ser. No. 48 (IAEA, Vienna, Austria, 2011).
Eddy Current Displacement Transducer — High Temperature Specifications, Specifications Sheet, 1–5 (2013).
Y. Lai, Eddy Current Displacement Sensor with LTCC Technology, Dissertation zur Erlangung des Doktorgrades der Fakultät für Angewandte Wissenschaften der Albert-Ludwigs Universität Freiburg im Breisgau, 2005.
V. N. Belopukhov, S. Yu. Borovik, M. M. Kuteynikova, et al., “Measurement of Radial Clearances with Increased Sensitivity in the Extended Range of Axial Displacement of the Turbine Wheel,” Mekhatronika, Avtomatizatsiya, Upravlenie 18 (4), 174–184 (2017).
S. Yu. Borovik, M. M. Kuteynikova, B. K. Raykov, et al., “Measurement of Radial Clearances between the Turbine Stator and Complex-Shaped Blade Tips using Single-Coil Eddy Current Sensors,” Mekhatronika, Avtomatizatsiya, Upravlenie, No. 10, 38–46 (2013).
S. Yu. Borovik, M. M. Kuteynikova, Yu. N. Sekisov, and O. P. Skobelev, “Analysis of Temperature Influence on the Informative Parameters of Single-Coil Eddy Current Sensors,” Avtometriya 53 (4), 104–111 (2017) [Optoelectron., Instrum. Data Process. 53 (4), 395401 (2017)].
S. Yu. Borovik, M. M. Kuteynikova, Yu. N. Sekisov, and O. P. Skobelev, “Model of a Measuring Circuit with Time-Varying Equivalent Inductances of Single-Coil Eddy Current Sensors,” in Proc. XVI Intern. Conf. Complex Systems: Control and Modelling Problems (Samara Scientific Center, Samara, 2014), pp. 687–691.
M. M. Kuteynikova, Yu. N. Sekisov, and O. P. Skobelev, “Model of the Electromagnetic Interaction between the Sensitive Element of a Single-Coil Eddy Current Sensor with a Complex-Shaped Blade Tip,” in Proc. XVI Intern Conf. Complex Systems: Control and Modelling Problems (Samara Scientific Center, Samara, 2013), pp. 627–635.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.Yu. Borovik, M.M. Kuteynikova, Yu.N. Sekisov, O.P. Skobelev, 2018, published in Avtometriya, 2018, Vol. 54, No. 1, pp. 124–131.
About this article
Cite this article
Borovik, S.Y., Kuteynikova, M.M., Sekisov, Y.N. et al. Influence of Turbine Wheelspace Temperature on Measurements of Radial and Axial Displacements of Blade Tips. Optoelectron.Instrument.Proc. 54, 105–111 (2018). https://doi.org/10.3103/S8756699018010168
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S8756699018010168