Abstract
The terminology relating to surface shaping by cutting is considered. Gaps in the standard terminology give rise to different terms for the same concept and different concepts described by the same term in the technical literature. The concept of the initial tool surface needs to be eliminated, since it covers three independent concepts: the initial generative surface; the initial generative cutting surface; the initial supply surface. Definitions are provided for concepts such as the generative and initial generative lines of tools; the initial surface to be machined and the final machined surface and others. Those definitions should be included in the relevant standard (State Standard GOST 25762–83).
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
GOST (State Standard) 25762–83: Machining. Terms, Definitions, Moscow: Izd. Standartov, 1983.
GOST (State Standard) 16530–83: Gears. General Terms, Definitions, and Symbols, Moscow: Izd. Standartov, 2004.
Lashnev, S.I., Borisov, A.N., and Emel’yanov, S.G., Geometricheskaya teoriya formirovaniya poverkhnostei rezushchimi instrumentami (Geometric Theory of Surface Formation in Cutting Tools), Kursk: Kursk. Gos. Tekh. Univ., 1997.
Perepelitsa, B.A., Avtomatizirovannoe profilirovanie rezhushchikh instrumentov (teoriya i algoritmy): Uchebnoe posobie (Automated Profiling of Cutting Tools (Theory and Algorithms): Manual), Khrkov: Khar’k. Politekh. Inst., 1985.
Klyuiko, E.V., Osnovy teorii formoobrazovaniya poverkhnostei na metallorezhushchikh stankakh (Fundamental theory of Surface Forming on Metal Cutting Machines), Tver: Tversk. Gos. Tekh. Univ., 2006.
Rodin, P.R., Osnovy proektirovaniya rezhushchikh instrumentov: Uchebnik (Engineering Principles of Cutting Tools: Manual), Kiev: Vyshcha Shkola, 1990.
Radzevich, S.P., Formoobrazovanie poverkhnostei detalei. Ocnovy teorii (Surface Formation of the Parts: Fundamental theory), Kyiv: Rastan, 2001.
Rezanie materialov. Rezhushchii instrument. Uchebnik (Cutting of Materials. Cutting Tool: Manual), Chemborisov, N.A., Ed., Moscow: Yurait, 2017, part 2.
Yudin, A.G., Shaping surface of cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 9, pp. 589–591.
Yudin, A.G., Basic concepts in surface shaping by cutting tools, Russ. Eng. Res., 2016, vol. 36, no. 10, pp. 857–860.
Yudin, A.G., Standardization of terminology in the kinematics of cutting and surface shaping, Russ. Eng. Res., 2017, vol. 37, no. 9, pp. 835–836.
Yudin, A.G., The second version of the general geometric model of cutting tools, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2017, no. 8-1, pp. 8–12.
GOST (State Standard) 3.1109–82: Unified System for Technological Documentation. Terms and Definitions of Main Concepts, Moscow: Izd. Standartov, 2001.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Yudin, A.G. Surface Shaping by Cutting: Theoretical Aspects. Russ. Engin. Res. 39, 951–954 (2019). https://doi.org/10.3103/S1068798X19110212
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19110212