Abstract
Determination of the parameters of a shaver and roller system for finishing the round teeth of cylindrical gears is considered. Algorithms are proposed for selecting machining pathways appropriate to the gear crown of the shaver and roller system. A mathematical model is derived for calculating the radii of curvature of the convex and concave sides of its teeth.
Similar content being viewed by others
REFERENCES
Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., Innovatsionnye tekhnologii obrabotki zub’ev tsilindicheskikh koles: Monografiya (Innovative Technologies of Processing of Teeth of Cylindrical Wheels: Monograph), Tula: Tul’sk. Gos. Univ., 2011.
Boriskin, O.I., Valikov, E.N., and Belyakov, V.A., Kombinirovannaya obrabotka zub’ev tsilindicheskikh zubchatykh koles shevingovaniem-prikatyvaniem: Monografiya (Combined Processing of Teeth of Cylindrical Gears by Shaving-Rolling: Monograph), Tula: Tul’sk. Gos. Univ., 2007.
Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., Cutting and plastic deformation in the shaving and rolling of cylindrical gears with round teeth, Russ. Eng. Res., 2013, vol. 33, no. 6, pp. 363–366.
Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., The dynamic characteristics of shaving-rolling of cylindrical wheels with circular teeth, Tekhnol. Mahsinostr., 2012, no. 2, pp. 19–23.
Valikov, E.N., Indan, A.A., and Popov, A.L., Experimental study of the accuracy of the shaving-pressing of cylindrical gears on CNC lathe, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2014, no. 5, pp. 11–17.
Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., Cutting and plastic deformation in the shaving and rolling of cylindrical gears with round teeth, Russ. Eng. Res., 2013, vol. 33, no. 6, pp. 363–366.
Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Paired cutting of cylindrical gears with longitudinally modified teeth, Russ. Eng. Res., 2009, vol. 29, no. 6, pp. 625–627.
Gryazev, M.V., Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Optimal machining of teeth in stamped tooth crowns by cutter heads, Russ. Eng. Res., 2010, vol. 30, no. 8, pp. 827–829.
Fedorov, Yu.N., Artamonov, V.D., and Zolotukhina, O.L., Paired tooth cutting of cylindrical gears, Russ. Eng. Res., 2009, vol. 29, no. 3, pp. 319–321.
Malikov, A.A. and Sidorkin, A.V., Shaving-rolling of cylindrical wheels with circular teeth, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2008, no. 2, pp. 69–76.
Yamnikov, A.S., Malikov, A.A., Valikov, E.N., and Sidorkin, A.V., Resource-saving technologies for the manufacture of cylindrical gears, Tekhnol. Mahsinostr., 2008, no. 7, pp. 7–10.
Malikov, A.A., Sidorkin, A.V., and Rakhmetov, S.L., Determination of basic parameter impact of shaver-roller chip groove upon its width, Naukoemkie Tekhnol. Mashinostr., 2018, no. 11, pp. 9–14.
Malikov, A.A., Sidorkin, A.V., and Yamnikov, A.S., Processing of round teeth of shave-rollings on CNC machines, Naukoemkie Tekhnol. Mashinostr., 2011, no. 6, pp. 15–20.
Yamnikov, A.S., Sheinin, G.M., and Bobkov, M.N., Grinding circular cylindrical-gear teeth of with planetary motion of the wheel axis, Russ. Eng. Res., 2008, vol. 28, no. 5, pp. 485–488.
GOST (State Standard) 13755–81: Basic requirements for Interchangeabilily, Gearings Cylindric Evolvent, Basic Rack, Moscow: Izd. Standartov, 1981.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Malikov, A.A., Sidorkin, A.V., Vasilyev, A.S. et al. Calculating the Manufacturing Parameters of a Shaver and Roller System Used to Produce Round-Tooth Cylindrical Gears. Russ. Engin. Res. 39, 973–976 (2019). https://doi.org/10.3103/S1068798X19110145
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19110145