Abstract
The operation of a bulk-action hybrid piston power unit is described by a mathematical model based on the laws of energy, mass, and momentum conservation and the equation of state. The influence of the pressure in the pump and compressor sections, the gap in the compressor section, and the eccentricity on the relation between the opposing liquid flow rates through the piston seal and on the thickness of the liquid layer above the piston is analyzed.
Similar content being viewed by others
REFERENCES
Kondyurin, A.Yu., Shcherba, V.E., Shalai, V.V., et al., Calculation of liquid flow through pump-compressor slot seal made in the form of hydrodiode, Chem. Petrol. Eng., 2016, vol. 52, nos. 3–4, pp. 267–273.
Kondyurin, A.Yu., Shcherba, V.E., Shalai, V.V., et al., Analysis and optimization of basic geometric parameters of annular slot seal made in the form of hydrodiode, Chem. Petrol. Eng., 2016, vol. 52, nos. 3–4, pp. 280–289.
Shcherba, V.E., Lysenko, E.A., Nesterenko, G.A., et al., Development and investigation of a piston seal in the form of a smooth stepped groove for a volumetric hybrid energy-converting piston machine, Chem. Petrol. Eng., 2016, vol. 52, nos. 3–4, pp. 290–296.
Plastinin, P.I., Porshnevye kompressory (Reciprocating Compressors), Moscow: Kolos, 2006, vol. 1.
Shcherba, V.E., Nesterenko, G.A., Pavlyuchenko, E.A., and Vinichenko, V.S., Analysis of compressor-pump piston seal formed from concentric slit with isolated channel in piston body, Chem. Petrol. Eng., 2014, vol. 50, nos. 1–2, pp. 105–112.
Kukolevskii, I.I. and Podviz, L.G., Sbornik zadach po mashinostroitel’noi gidravlike (Collection of Tasks on Machine Engineering Hydraulics), Moscow: Mos. Gos. Tekh. Univ. im. N.E. Baumana, 2002.
Shcherba, V.E., Shalai, V.V., Kondyurin, A.Yu., et al., Analysis of deformation, mass transfer, and thermal interaction during the compression in volumetric pumps, Vestn. Mashinostr., 2018, no. 10, pp. 16–20.
Shcherba, V.E., Pavlyuchenko, E.A., and Kuzhbanov, A.K., Mathematical modeling of processes of suction and discharge in a displacement pump with gas damper, Chem. Petrol. Eng., 2013, vol. 49, nos. 7–8, pp. 460–466.
Shcherba, V.E., Bolshtyanskii, A.P., Shalai, V.V., et al., Nasos-kompressory. Rabochie protsessy i osnovy proektirovaniya (Pump-Compressors: Operation and Design), Moscow: Mashinostroenie, 2013.
Shcherba, V.E., Shalai, V.V., Pavlyuchenko, E.A., and Vinichenko, V.S., Mathematical modeling of the workflows of a reciprocating compressor with intensive cooling of the cylindrical piston group, Chem. Petrol. Eng., 2015, vol. 51, nos. 3–4, pp. 260–267.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Bazhenov, A.M., Shcherba, V.E., Shalai, V.V. et al. Modeling the Operation of Bulk-Action Hybrid Piston Power Systems. Russ. Engin. Res. 39, 377–382 (2019). https://doi.org/10.3103/S1068798X19050046
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19050046