Abstract
Analytical formulas are obtained for the loading and unloading of topocomposites in tool indentation. On that basis, theoretical penetration diagrams are derived, for use in the creation of new tribological topocomposites.
Similar content being viewed by others
REFERENCES
Mashinostroenie, Entsiklopediya, T. 4-1. Detali mashin. Konstruktsionnaya prochnost'. Trenie, iznos, smazka (Mechanical Engineering. Encyclopedia, Vol. 4-1: Machine Parts. Construction Strength. Friction, Wear, and Lubrication), Reshetov, D.N., Ed., Moscow: Mashinostroenie, 1995.
Voronin, N.A., The influence of strain hardening of a base material on the effective characteristics of a topocomposite, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 6, pp. 539–545.
GOST (State Standard) R 8.748–2011: State System for Ensuring the Uniformity of Measurements, Metallic Materials. Instrumented Indentation Test for Hardness and Materials Parameters, Part 1. Test Method, Moscow: Standartinform, 2013.
Fischer-Cripps, A.C., Nanoindentation, New York: Springer-Verlag, 2008, 3rd ed.
Fischer-Cripps, A.C., Critical review of analysis and interpretation of nanoindentation test data, Surf. Coat. Technol., 2006, vol. 200, pp. 4153–4165.
Models for thin films. https://github.com/DavidMercier/NIMS/blob/master/doc/models_thin_films.rst.
Sakharova, N.A., Oliveira, M.C., Antunes, J.M., and Fernandesa, J.V., On the determination of the film hardness in hard film/substrate composites using depth-sensing indentation, Ceram. Int., 2013, vol. 39, pp. 6251–6263.
Voronin, N.A., Effect of coating thickness and substrate material on mechanical properties and carrying capacity of hardened surfaces, in Metody uprochneniya poverkhnostei detalei mashin (Methods of Surface Hardening of Machine Parts), Moskvitin, G.V., Ed., Moscow: Krasand, 2008, pp. 91–122.
Voronin, N.A., Composite, effective, and real harnesses of thin coatings, J. Frict. Wear, 2010, vol. 31, no. 4, pp. 241–252.
Ngo Kao Kyong, Extracontact deformations at local loading, Vestn. Nauki Obraz. Sev.-Zap. Ross., 2015, vol. 1, no. 3, pp. 1–8 http://vestnik-nauki.ru/.
ACKNOWLEDGMENTS
Financial support was provided by the Russian Ministry of Education and Science (contract 14.607.21.0166; project RFMEF160717X0166.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Voronin, N.A. Penetration Diagrams Used in the Creation of Tribological Topocomposites. Russ. Engin. Res. 39, 307–313 (2019). https://doi.org/10.3103/S1068798X1904018X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1904018X