Abstract
The failure of threaded joints between composites with 4DL reinforcement is analyzed. A formula is proposed for estimating the carrying capacity of a threaded joint at the design stage.
Similar content being viewed by others
REFERENCES
Zakharov, M.N. and Lyubchenko, M.A., Analysis of maximum loads for the screw joints from carbon-carbon composites, Konstr. Kompoz. Mater., 2017, no. 4, pp. 82–87.
Andrienko, L.A., Baikov, B.A., and Zakharov, M.N., Detali mashin (Machine Parts), Ryakhovskii, O.A., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014.
Gomes, J.R., Silva, O.M., Silva, C.M., et al., The effect of sliding speed and temperature on the tribological behavior of carbon-carbon composites, Wear, 2001, vol. 249, pp. 240–245.
Zakharov, M.N., Destruction criterion of pipe steels in zones of sharp and smooth concentrators, Izv. Vyssh. Uchebn. Zaved., Neft Gaz (Tyumen, Russ. Fed.), 2000, no. 3, pp. 74–81.
Bulatova, A.Z., Zakharov, M.N., and Morozov, E.M., Assessing the risk of peeling in metal structures on the basis of the crack-resistance diagram, Zavod. Lab., Diagn. Mater., 2010, no. 3, pp. 41–46.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Zakharov, M.N., Lyubchenko, M.A. & Magnitskii, I.V. Failure of Threaded Joints between Composite Components. Russ. Engin. Res. 39, 195–198 (2019). https://doi.org/10.3103/S1068798X19030237
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19030237