Abstract
Two robot systems for the shaping and machining of polymer-composite products are described. In the shaping system, an industrial robot lays out the fibers as prepreg tape. In the machining system, the boring and milling of polymer composites is improved. This system is adapted for the machining of sound-absorbing structures in airplane engines,
Similar content being viewed by others
REFERENCES
Anoshkin, A.N., Teoriya i tekhnologiya namotki konstruktsii iz polimernykh kompozitsionnykh materialov: uchebnoe posobie (Theory and Technology of Winding Structures from Polymeric Composites), Perm: Permsk. Gos. Tekh. Univ., 2003.
Vaniglia, M.M., US Patent 5110395, 1989.
Grinev, M.A., New robot used by Perm engineers, Permsk. Aviats. Dvigateli, 2013, no. 27, pp. 56–58.
Dudarev, A.S., Automated punching of apertures in noise-proof panels of aircraft engines from polymeric composite materials, Probl. Mashinostr. Avtom., 2012, no. 3, pp. 63–68.
Dudarev, A.S., Svirshchev, V.I., and Bayandin, M.A., Robotic complex for hole punching and milling of noise-proof panels of aircraft engines from polymer composite materials, Avtom. Sovrem. Tekhnol., 2013, no. 1, pp. 9–14.
Lomaev, V.I. and Dudarev, A.S., Machining of holes in the manufacture of products from fibrous composite materials for civil aircrafts, Tekhnol. Mashinostr., 2006, no. 7, pp. 18–22.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Dudarev, A.S. Robots in the Production of Polymer-Composite Components. Russ. Engin. Res. 39, 242–245 (2019). https://doi.org/10.3103/S1068798X19030067
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19030067