Abstract
The temperature dependence of the electromagnetic properties of hard tool alloys is studied experimentally. Temperature intervals corresponding to maximum alloy performance are identified. A method is proposed for determining the maximum-performance temperature of hard-alloy cutting inserts from the temperature dependence of the electromagnetic properties.
Similar content being viewed by others
REFERENCES
Bobrov, V.F., Osnovy teorii rezaniya metallov (Fundamental Theory of Metal Cutting), Moscow: Mashinostroenie, 1975.
Vasin, S.A., Vereshchaka, A.S., and Kushner, V.S., Rezanie metallov. Termomekhanicheskii podkhod k sisteme vzaimosvyazei pri rezanii: Uchebnik dlya tekhnicheskikh vuzov (Cutting of Metals. Thermomechanical Approach to the Relationships during Cutting: Manual for Higher Education Technical Institutions), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2001.
Vereshchaga, A.S., Rabotosposobnost’ rezhushchego instrumenta s iznosostoikimi pokrytiyami (Performance of Cutting Tool with Wear-Resistant Coatings), Moscow: Mashinostroenie, 1993.
Skhirtladze, A.G., Grechishnikov, V.A., Grigor’ev, S.N., and Korotkov, I.A., Proektirovanie metalloobrabatyvayushchikh instrumentov: uchebnoe posobie (Design of Metal Processing Tools: Manual), St. Petersburg: Lan’, 2015.
Zorev, N.N. and Fetisov, Z.M., Obrabotka rezaniem tugoplavkikh splavov (Cutting of Refractory Alloys), Moscow: Mashinostroenie, 1966.
Loladze, T.N., Prochnost’ i iznosostoikost’ rezhushchego instrumenta (Durability and Wear-Resistance of Cutting Tool), Moscow: Mashinostroenie, 1982.
Makarov, A.D., Optimizatsiya protsessov rezaniya (Optimization of Cutting Processes), Moscow: Mashinostroenie, 1976.
Petrushin, S.I., Danilenko, B.D., and Retyunskii, O.Yu., Optimizatsiya svoistv materiala v kompozitsionnoi rezhushchei chasti lezviinykh instrumentov: uchebnoe posobie (Optimization of Material Properties in Composite Cutting Part of Blade Tools: Manual), Tomsk: Tomsk. Politekh. Inst., 1999.
Poletika, M.F. and Kozlov, V.N., Contact loads and temperatures on worn tools, in Progressivnye tekhnologicheskie portsessy v mashinostroenii (Advanced Technological Processes in Machine Engineering), Tomsk: Tomsk. Politekh. Univ., 1997, pp. 18–21.
Reznikov, A.N. and Reznikov, L.A., Teplovye protsessy v tekhnologicheskikh sistemakh (Thermal Processes in Technological Systems), Moscow: Mashinostroenie, 1990.
Rozenberg, A.M. and Eremin, A.N., Elementy teorii protsessa rezaniya metallov (The Elements of the Cutting Theory of Metals), Moscow: Mashgiz, 1956.
Silin, S.S., Metod podobiya pri rezanii metallov (Similarity Method in Metal Cutting), Moscow: Mashinostroenie, 1979.
Starkov, V.K., Fizika i optimizatsiya rezaniya materialov (Physics and Optimization of Cutting of Materials), Moscow: Mashinostroenie, 2009.
Grigor’ev, S.N., Metody povysheniya stoikosti rezhushchego instrumenta: uchebnik dlya vuzov (Strength Improvement of Cutting Tools: Manual for Higher Education Students), Moscow: Mashinostroenie, 2011.
Zorev, N.N. and Uteshev, M.H., Untersuchung der Kintakt-spannunger auf den Arbeits-flachen des Werkzeugs miteiner Schneidenabrundung, Ber. Int. Forsch. Mechanische Prod. Tech., 1971, vol. 20, no. 1, pp. 31–32.
Shalamov, V.G., Savel’ev, D.A., and Smetanin, S.D., Producing powder by rotary grinding, Russ. Eng. Res., 2013, vol. 33, no. 3, pp. 133–135.
Nguen Van Kyong and Yamnikov, A.S., Optimization of cutting regimes, Fundam. Prikl. Tekh. Tekhnol., 2012, no. 1 (291), pp. 56–63.
Artamonov, E.V., Prochnost’ i rabotosposobnost’ smennykh tverdoslavnykh plastin sbornykh rezhushchikh instrumentov (Strength and Performance of Replaceable Hard-Alloy Plates in Composite Tools), Tyumen: Tyumen. Gos. Neftegaz. Univ., 2003, pp. 101–104.
Vasilega, D.S. and Zyryanov, V.A., Analysis of possible application of temperature dependences of processed materials’ physical and mechanical properties to define the maximum workability temperature, Key Eng. Mater., 2017, vol. 737, pp. 114–118.
Artamonov, E.V., Vasilega, D.S., and Tveryakov, A.M., Determining the maximum-performance temperature of hard-alloy cutting plates based on electric conductivity, Zavod. Lab., Diagn. Mater., 2014, vol. 80, no. 9, pp. 36–39.
Artamonov, E.V., Kuskov, V.N., Vasilega, D.S., and Tveryakov, A.M., RF Patent 2468894, Byull. Izobret., 2012, no. 34.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Artamonov, E.V., Tveryakov, A.M. & Shtin, A.S. Determining the Maximum-Performance Temperature of Hard-Alloy Cutting Inserts on the Basis of Their Electromagnetic Properties. Russ. Engin. Res. 39, 259–261 (2019). https://doi.org/10.3103/S1068798X19030043
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19030043