Abstract
The electrochemical machining of (10–30)-μm depressions on titanium-alloy parts is investigated, with variation in the conditions of electrolysis. Recommendations for electrochemical engraving are formulated.
Similar content being viewed by others
REFERENCES
Astakhov, Yu.P., Kochergin, S.A., Morgunov, Yu.A., et al., Microprocessing of surface reliefs by physical and chemical methods, Naukoemkie Tekhnol. Mashinostr., 2012, no. 7, pp. 33–38.
Saushkin, B.P., Atanasyants, A.G., and Sychev, G.A. Problems and outlook of the development of pulse electrochemical machining, Electron. Mach. Mater., 2003, no. 2, pp. 10–22.
Venkov, V.S., Saushkin, B.P., and Dikusar, A.I., Analysis of production technologies of surface understatements at 10–20 µm depth, Uprochnyayushchie Tekhnol. Pokrytiya, 2008, no. 6, pp. 48–53.
Saushkin, G.B. and Morgunov, Yu.A., Electrochemical deposition of data on the surface of machine parts, Uprochnyayushchie Tekhnol. Pokrytiya, 2009, no. 12, pp. 45–49.
Morgunov, Yu.A., Saushkin, G.B., and Vilidanov, T.V., Electrochemical engraving of aerodynamic downwards in the balance with a flow channel, Metalloobrabotka, 2010, no. 2, pp. 70–74.
Saushkin, G.B. and Morgunov, Yu.A., Theoretical analysis of the electrochemical grading of aerodynamic downwards, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2011, no. 1, pp. 184–188.
Lomaev, V.I., Morgunov, Yu.A., Saushkin, B.P., et al., Elektrokhimicheskaya obrabotka izdelii aviatsionno-kosmicheskoi tekhniki: uchebnoe posobie (Electrochemical Treatment of the Products for Aerospace Equipment: Manual), Saushkin, B.P., Ed., Moscow: Forum, 2013.
Saushkin, B.P., Electrical discharge in liquid and gas medium is the base of a new generation of methods and technologies in machine building production, Electron. Mach. Mater., 2004, no. 3, pp. 4–17.
Saushkin, B.P., Electrochemical finishing of materials, Metalloobrabotka, 2001, no. 1, pp. 27–30.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Morgunov, Y.A., Saushkin, B.P. & Saushkin, G.B. Micromachining of Titanium-Alloy Components. Russ. Engin. Res. 39, 125–128 (2019). https://doi.org/10.3103/S1068798X19020229
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19020229