Abstract
The application of a longitudinal magnetic field in welding aluminum coated sheet is considered. A special welding head is used to produce weld joints of satisfactory quality. Findings are obtained regarding the formation and metallographic structure of the metal in the seam, with the segregation of aluminum over its cross section. The formation of composite structure is noted.
Similar content being viewed by others
REFERENCES
Karter, V.I., Metallicheskoe protivokorrozionnye pokrytiya (Metal Anticorrosion Coatings), Leningrad: Sudostroenie, 1980.
Saakiyan, L.S. and Efremov, A.P., Zashchita neftegazopromyslovogo oborudovaniya ot korrozii (Corrosion Protection of Oil and Gas Equipment), Moscow: Nedra, 1982.
Krampit, A.G., Technological procedures and control methods of the weld formation, Tekhnol. Met., 2008, no. 11, pp. 38–43.
Steklov, O.I., Karmazinov, N.P., and Sycheva, M.A., The effect of sprayed aluminum on the properties of the weld metal during mechanized welding of sheet metal, Svar. Proizvod., 1988, no. 10, pp. 11–12.
Moravetskii, S.I., Porshenkov, N.A., and Sokirko, V.A., Specific electromagnetic effects on metals and their welded joints: a review, Avtom. Svarka, 2007, no. 6, pp. 20–26.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Sychev, A.P., Sycheva, M.A. Influence of Aluminum Coatings on the Quality of Weld Joints. Russ. Engin. Res. 38, 992–995 (2018). https://doi.org/10.3103/S1068798X18120201
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X18120201