Advertisement

Russian Engineering Research

, Volume 37, Issue 3, pp 266–269 | Cite as

Precision of surfaces machined on a lathe with geometric errors

  • R. M. Khusainov
  • S. Yu. Yurasov
  • R. R. Ziyatdinov
  • G. K. Davletshina
  • V. A. Grechishnikov
  • A. V. Isaev
  • P. M. Pivkin
Article

Abstract

The precision attained in the shape and mutual position of cylindrical surfaces after machining may be assessed by means of a mathematical model. The effectiveness of the model is confirmed in practice.

Keywords

lathe geometric precision shape errors surface-configuration errors 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Khisamutdinov, R.M., Khusainov, R.M., Vedernikov, Yu.A., et al., Geometricheskaya tochnost’ metallorezhushchikh stankov (Geometric Precision of Metal Cutting Machines), Naberezhnye Chelny: Raduga, 2013.Google Scholar
  2. 2.
    Reshetov, D.N. and Portman, V.T., Tochnost’ metallorezhushchikh stankov (Precision of Metal Cutting Machines), Moscow: Mashinostroenie, 1986.Google Scholar
  3. 3.
    Grechishnikov, V.A., Domnin, P.V., et al., Formoobrazovanie i kontrol’ rezhushchikh instrumentov: uchebnoe posobie (Shaping and Control of Cutting Tools: Manual), Moscow: Mosk. Gos. Tekhnol. Univ., Stankin, 2015.Google Scholar
  4. 4.
    Grechishnikov, V.A., Petukhov, Yu.E., Kosarev, V.A., et al., Instrumental’naya tekhnika, tekhnologiya izgotovleniya i SAPR RI(Instrumental Equipment, Production Technology and CAD RI), Grechishnikov, V.A., Ed., Moscow: Mosk. Gos. Tekhnol. Univ., Stankin, 2015.Google Scholar
  5. 5.
    Isaev, A.V., Engineering of assembled shaped cutters with round flexible faceted blades located on the screw surface, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2011, no. 1, pp. 61–66.Google Scholar
  6. 6.
    Romanov, V.B., Precision improvement of generating profile of gear cutters, Cand. Sci. (Tech.) Dissertation, Moscow, 2005.Google Scholar
  7. 7.
    Grechishnikov, V.A. and Pivkin, P.M., Simulation of the surface roughness of the product depending on the parameters of the cutting tool and the shape of the mold part during mechanical treatment, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2014, no. 4 (31), pp. 59–66.Google Scholar
  8. 8.
    GOST (State Standard) R ISO 230-1-2010: Machine Tools Tests. Part 1. Measurement Techniques of Geometrics Parameters, Moscow: Standartinform, 2010.Google Scholar
  9. 9.
    GOST (State Standard) 1654-86: General-Purpose Lathe Chucks. General Specifications, Moscow: Standartinform, 2005.Google Scholar
  10. 10.
    Markov, N.N. and Ganevskii, G.M., Konstruktsiya, raschet i ekspluotatsiya kontrol’no-izmeritel’nykh instrumentov i priborov (Engineering, Calculation, and Use of Control-Measuring Instruments and Devices), Moscow: Mashinostroenie, 1993.Google Scholar
  11. 11.
    Kwasny, W., Turek, P., and Jedrzejewski, J., Survey of machine tool error measuring methods, J. Mach. Eng., 2011, vol. 11, no. 4. pp. 7–38.Google Scholar
  12. 12.
    Muelanera, J.E., Yanga, B.R., Davya, C., et al., Rapid machine tool verification, Proc. CIRP, 2014, vol. 25, pp. 431–438.CrossRefGoogle Scholar
  13. 13.
    Chana Raksiri, and Manukid Parnichkun, Geometric and force errors compensation in a 3-axis CNC milling machine, Int. J. Mach. Tools Manuf., 2004, vol. 44, pp. 1283–1291.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2017

Authors and Affiliations

  • R. M. Khusainov
    • 1
  • S. Yu. Yurasov
    • 1
  • R. R. Ziyatdinov
    • 1
  • G. K. Davletshina
    • 1
  • V. A. Grechishnikov
    • 2
  • A. V. Isaev
    • 2
  • P. M. Pivkin
    • 2
  1. 1.Naberezhnye Chelny InstituteKazan Federal UniversityNaberezhnye ChelnyRussia
  2. 2.Stankin Moscow State Technological UniversityMoscowRussia

Personalised recommendations