Advertisement

Russian Engineering Research

, Volume 37, Issue 3, pp 253–257 | Cite as

Energy losses in the electric motor of a high-speed spindle

  • F. R. Ismagilov
  • I. Kh. Khairullin
  • V. E. Vavilov
  • V. I. Bekuzin
  • A. S. Gorbunov
  • R. D. Karimov
Article

Abstract

Means of increasing the energy efficiency of high-speed spindles for micromachining are considered. Methods of calculating the losses in the electric motor’s stator yoke for a high-speed spindle are analyzed. Recommendations are made for the minimization of such losses.

Keywords

high-speed spindles high-speed micromachining energy losses stator yoke highly coercive permanent magnets 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Chae, J., Park, S., and Freiheit, T., Investigation of micro-cutting operations, Int. J. Mach. Tools Manuf., 2006, vol. 46, nos. 3–4, pp. 313–332.Google Scholar
  2. 2.
    Bourell, D., Ehmann, K.F., Culpepper, M.L., et al., International Assessment of Research and Development in Micromanufacturing, Baltimore: World Technol. Eval. Center, 2005.Google Scholar
  3. 3.
    Wicht, H. and Bouchaud, J., NEXUS market analysis for MEMS and microsystems III 2005–2009, in MSTNews, Berlin: VDI/VDE Innov. Tech., 2005, vol. 5, pp. 33–34Google Scholar
  4. 4.
    Borisavljevic, A., Modeling and design of high-speed permanent magnet machines, PhD Thesis, Dordrecht: Springer-Verlag,2011, p. 217.Google Scholar
  5. 5.
    Gerasin, A.A., Ismagilov, F.R., Khairullin, I.Kh., and Vavilov, V.E., Permanent-magnet shaft bearing for high-speed spindles, Russ. Eng. Res., 2013, vol. 33, no. 12, pp. 718–722.CrossRefGoogle Scholar
  6. 6.
    Dubovetskii, B.O. and Zverev, I.A., Modern status and prospective development of high-speed spindle units of metal cutting machines, Tekhnol. Mashinostr., 2013, no. 5, pp. 27–33.Google Scholar
  7. 7.
    Kosmynin, A.V. and Shchetinin, V.S., Carrying capacity of gas-magnetic bearings for high-speed spindles, Russ. Eng. Res., 2010, vol. 30, no. 12, pp. 1252–1253.CrossRefGoogle Scholar
  8. 8.
    Kozochkin, M.P., Sabirov, F.S., Durko, E.M., Davydov, V.M., and Zaev, V.V., Diagnostics and monitoring of spindle bearings, Russ. Eng. Res., 2014, vol. 34, no. 1, pp. 34–36.CrossRefGoogle Scholar
  9. 9.
    Ledovskii, A.N., Elektricheskie mashiny s vysokokoertsitivnymi postoyannymi magnitami (Electrical Machines with High-Coercive Permanent Magnets), Moscow: Energoatomizdat, 1985.Google Scholar
  10. 10.
    Vol’dek, A.I., Elektricheskie mahsiny: uchebnik dlya elektrotekhnicheskikh spetsial’nosti vuzov (Electric Machines: Manual for Electrotechnical Specialties of Higher Education Institutions), Leningrad: Energiya, 1978.Google Scholar
  11. 11.
    Balagurov, V.A., Proektirovanie spetsial’nykh elektricheskikh mashin peremennogo toka (Engineering of Species Electric ACMachines), Moscow: Vysshaya Shkola, 1982.Google Scholar
  12. 12.
    Ivanov-Emolenskii, A.V., Elektricheskie mahsiny (Electric Machines), Moscow: Energiya, 1980.Google Scholar
  13. 13.
    Soulard, J., Meier, S., and Chin, Y.-K., Modeling of iron losses in permanent magnet motors with field-weakening capability. http://www.researchgate.net/profile/Juliette_-Soulard/publication/242468512_Modeling_of_Iron_Losses_in_Permanent_Magnet_Motors_with_Field- Weakening_Capability. Accessed February 14, 2015.Google Scholar
  14. 14.
    Spetsial’nye elektricheskie mashiny. Istochniki i preobrazovateli energii: uchebnoe posobie (Specific Electric Machines. Energy Sources and Converters), Bertinov, A.I., Ed., Moscow: Energoizdat, 1982.Google Scholar
  15. 15.
    Huynh, C., Zheng, L., and Acharya, D., Losses in high speed permanent magnet machines used in microturbine applications, J. Eng. Gas Turbines Power, 2009, vol. 131, no. 2 pp. 1–6.CrossRefGoogle Scholar
  16. 16.
    Saban, D.M., Bailey, C., Gonzalez-Lopez, D., and Luca, L., Experimental evaluation of a high-speed permanent-magnet machine, 55th IEEE Petroleum and Chemical Industry Technical Conf., Piscataway, NJ: Institute of Electrical and Electronics Engineers, 2008.Google Scholar
  17. 17.
    Sugrobov, A.M. and Rusakov, A.M., Proektirovanie elektricheskikh mashin avtonomnykh ob”ektov (Engineering of Electric Machines of Autonomous Objects), Moscow: Mosk. Energet. Inst., 2012.Google Scholar

Copyright information

© Allerton Press, Inc. 2017

Authors and Affiliations

  • F. R. Ismagilov
    • 1
  • I. Kh. Khairullin
    • 1
  • V. E. Vavilov
    • 1
  • V. I. Bekuzin
    • 1
  • A. S. Gorbunov
    • 1
  • R. D. Karimov
    • 1
  1. 1.Ufa State Aviation-Engineering UniversityUfaRussia

Personalised recommendations