Skip to main content
Log in

Method for correction of gauge interference of the head-strip section in a system for automated controlling of the thickness of a broad-strip hot-rolling mill

  • Published:
Russian Electrical Engineering Aims and scope Submit manuscript

An Erratum to this article was published on 01 January 2018

Abstract

To compensate for gauge interference caused by increased temperature of the head-strip section during milling on a broad-strip hot-rolling mill, a method for automated correction of thickness is proposed. Its essence lies in additional separation of the rolls during rolling of the head section with its subsequent return into the specified position for rolling the main strip length. The structure of the system for automated controlling, which implements this method, is considered. Rational parameters for correction of the roll space for the strips of diverse assembly are substantiated. The results of experiments performed at roll 2000 of the Magnitogorsk Iron and Steel Works are presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Salganik, V.M., Gun, I.G., Karandyaev, A.S., and Radionov, A.A., Tonkoslyabovye liteino-prokatnye agregaty dlya proizvodstva stal’nykh polos (Thinslabe Casting-Rolling Devices for Producing Steel Bands), Moscow: Mosk. Gos. Tekhn. Univ. im. N.E. Baumana, 2003.

    Google Scholar 

  2. Hydraulic Automatic Gauge Control, Davy McKee (Sheffield) Ltd., 1987.

  3. Khramshin, V.R., Andryushin, I.Yu., Shilyaev, P.V., Petryakov, S.A., and Gostev, A.N., Technical solution in automatic control system for 2000 hot rolling lathe thickness, Izv. Vyssh. Uchebn. Zaved., Elektromekh., 2011, no. 4, pp. 41–45.

    Google Scholar 

  4. Galkin, V.V., Petryakov, S.A., Karandaev, A.S., and Khramshin, V.R., Automated thickness correction of band head in hydraulic system for thickness automated control of wide-band broadband, Izv. Vyssh. Uchebn. Zaved., Elektromekh., 2011, no. 4, pp. 46–50.

    Google Scholar 

  5. Khramshin, V.R., Karandaev, A.S., Petryakov, S.A., Galkin, V.V., and Khramshin, R.R., RF Minor Patent 117329, IPC 7 B 21 B 37/16, BIMP, 2012, no. 18.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

Original Russian Text © A.S. Karandaev, V.R. Khramshin, I.Yu. Andryushin, S.A. Petryakov, R.R. Khramshin, 2013, published in Elektrotekhnika, 2013, No. 8, pp. 34–38.

The original version of this article was revised: Previously missing affiliations were added.

A correction to this article is available at http://dx.doi.org/10.3103/S1068371218010169

About this article

Cite this article

Karandaev, A.S., Khramshin, V.R., Andryushin, I.Y. et al. Method for correction of gauge interference of the head-strip section in a system for automated controlling of the thickness of a broad-strip hot-rolling mill. Russ. Electr. Engin. 84, 441–445 (2013). https://doi.org/10.3103/S1068371213080087

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S1068371213080087

Keywords

Navigation