Abstract
Using one-step high-temperature polycondensation, soluble polyimide based on 9,9-bis-(4’-aminophenyl) fluorene and 3,3’, 4,4’-diphenyl oxide tetracarboxylic acid dianhydride is synthesized. Polyimide varnishes inN-methyl-2-pyrrolidone are prepared, and technological conditions of their deposition during fiber drawing are studied. A polymer coating thickness over 6 μm is achieved for a single application. It is demonstrated that the developed coating almost does not degrade for a long time at temperatures to 250 °C and completely protects the optical fiber surface from water penetration.
Similar content being viewed by others
References
S. V. Vinogradova, V. A. Vasnev, and Ya. S. Vygodskii, Usp. Khim. 65, 266 (1996) [Russ. Chem. Rev. 65, 249 (1996)].
K. Sohma and T. Hattori, Proceedings of the 60th International Wire and Cable Symposium, Charlotte, USA, 2011, p. 424; http://www.iwcs.org/56333-iwcs-2011-b-1.1829889/t-001-1.183035/f-013- 1.1830362/12-3-1.1830369/12-3-1.1830370.
S. L. Semenov, D. A. Sapozhnikov, D. Yu. Erin, et al., Kvant. Elektron. 45, 330 (2015) [Quantum Electron. 45, 330 (2015)].
S. L. Semenov, Candidate’s Dissertation in Physics and Mathematics (IOFAN, Moscow, 1997).
W. Weibull, J. Appl.Mech.-Trans. ASME 18 (3), 293 (1951); http://www.barringer1.com/wa-files/Weibull-ASME-Paper-1951.pdf
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.F. Kosolapov, E.A. Plastinin, S.L. Semjonov, B.A. Bayminov, D.A. Sapozhnikov, D.D. Alekseeva, Ya.S. Vygodskii, 2017, published in Kratkie Soobshcheniya po Fizike, 2017, Vol. 44, No. 6, pp. 9–14.
About this article
Cite this article
Kosolapov, A.F., Plastinin, E.A., Semjonov, S.L. et al. Advanced polyimide varnish for optical fiber coating fabrication. Bull. Lebedev Phys. Inst. 44, 159–162 (2017). https://doi.org/10.3103/S1068335617060021
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068335617060021