Abstract
The effect of sintering aids of SiO2, ZrO2, B2O3, and MgO oxides on the optimum sintering temperature, ceramics grain growth, total volume of residual pores, and optical quality of obtained ceramics is studied. The best combinations of sintering aids are found; as a result, YAG:Nd (1 at%) samples of ceramics of high optical quality are obtained. An original method for characterizing laser properties of ceramics is developed. Comparative measurements of main laser characteristics of the obtained ceramics and ceramics of the Konoshima Chemical Corp. Ltd wellknown in the world practice, are performed.
Similar content being viewed by others
References
L. Esposito, A. L. Costa, and V. Medri, J. Eur. Ceram. Soc. 28, 1065 (2008).
A. Ikesue, I. Furusato, and K. J. Kamata, J. Am. Ceram. Soc. 78, 225 (1995).
Liu Jun, Lin Li, Li Jiang, et al., Ceram. International 40, 1271 (2014).
Li Xiaodong, Li Ji-Guang, Xiu Zhimeng, et al., J. Am. Ceram. Soc. 92, 241 (2009).
A. P. Patel, M. R. Levy, R. W. Grimes, et al., Appl. Phys. Lett. 93, 191902 (2008).
R. Boulesteix, A. Maitre, L. Chretien, et al., J. Am. Ceram. Soc. 96, 1724 (2013).
Yu. L. Kopylov, V. B. Kravchenko, S. N. Bagayev, et al., Opt. Mater. 31, 707 (2009).
Lin Ge, Jiang Li, Zhiwei Zhou, et al., Opt. Mater. A 50, 25 (2015).
A. A. Kwadwo, G. L. Messing, and J. Q. Dummc, Ceram. Int. 34, 1309 (2008).
Wei Zhang, Lu Tiecheng, Maa B., et al., Opt. Mater. 35, 2405 (2013).
Z. Wang, Le Zhang, H. Yang, et al., Ceram. Int. 42, 4238 (2016).
Ge L, Li Jiang, Zhou Zhiwei, et al., J. Am. Ceram. Soc. 94(5), 1380 (2011).
H. Yagi, T. Yanagitani, and K.-I. Ueda, J. Alloys Compd. 421, 195 (2006).
H. Yagi, T. Yanagitani, K. Takaichi, et al., Opt. Mater. 29, 1258 (2007).
R. Gaume, He A. Markosyan, and R. L. Baer, J. Appl. Phys. 111, 093104 (2012).
Y. K. Li, S. M. Zhou, H. Lin, et al., J. Alloys Compd. 502, 225 (2010).
H. Yang, X. P. Qin, J. Zhang, et al., Opt.Mater. 34, 940 (2012).
J. C. Chen, J. Li, J. L. Xu, et al., Opt. Laser Technol. 63, 50 (2014).
A. J. Stevenson, X. Li, M. A. Martinez, et al., J. Mater. Res. 26, 2022 (2011).
Oh Hun and G. L. Messsing, ActaMetall. Mater. 39, 2059 (1991).
V. V. Bezotosnyi, E. A. Cheshev, M. V. Gorbunkov, et al., Laser Phys. Lett. 12, 025001 (2015).
V. V. Bezotosnyi, O. N. Krokhin, A. L. Koromyslov, et al., in Proceedings of the 5th Symposium on Coherent Optical Radiation of Semiconductor Compounds and Structures, Moscow-Zvenigorod, Russia, 2015 (FIAN,Moscow, 2015), p. 38.
A. A. Kaminskii, V. V. Balashov, L. Demianova, et al., in Optical Properties, Problems and Prospects. Proceedings of the 11th Laser Ceramics Symposium LCS-2015–International Symposium on Transparent Ceramics for Photonics Applications, Xuzhou, China, 2015, pp. 63–64.
H. Wu, C. Sheu, T. Chen, et al., Opt. Commun. 165, 225 (1999).
R. Boulesteix, A. Maître, J.-F. Baumard, et al., Reynaud Opt. Express 18, 14992 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Kaminskii, V.V. Balashov, E.A. Cheshev, Yu.L. Kopylov, A.L. Koromyslov, O.N. Krokhin, V.B. Kravchenko, K.V. Lopukhin, I.M. Tupitsyn, V.V. Shemet, 2016, published in Kratkie Soobshcheniya po Fizike, 2016, Vol. 43, No. 12, pp. 49–55.
About this article
Cite this article
Kaminskii, A.A., Balashov, V.V., Cheshev, E.A. et al. Laser-quality oxide Y3Al5O12 ceramics. Comparative studies of its basic characteristics and laser ceramics of a known manufacturer. Bull. Lebedev Phys. Inst. 43, 371–374 (2016). https://doi.org/10.3103/S1068335616120083
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068335616120083