Abstract
The advantages of the carbothermic method of digesting the perovskite concentrate when compared with hydrometallurgical methods are noted. Works in which the carbothermic method was used are mentioned. Data on the known processing methods of perovskite, which had not found application in industry, are given. The results of the investigation into digestion of the titanium raw materials by the example of artificially synthesized perovskite CaO · TiO2 are presented. Artificial perovskite is synthesized in a muffle furnace; herewith, the oxide mixture (41.2 wt % CaO and 58.8 wt % TiO2) is preliminarily stirred for 15 min and briquetted into pellets in a steel mold 15 mm in diameter using a hydraulic press with a force of 147 MPa. The synthesis temperature of CaTiO3 is 1300°C with a holding time of 4 h. Experiments with different carbon excesses (20 and 30 wt % of that stoichiometrically necessary to reduce the perovskite components) are performed. The carbothermic digestion process of artificial perovskite (pellets 4 g in weight) is performed in a vacuum furnace with a graphite heater in two stages: at 1500°C, holding time of 10.1 kPa, and a residual pressure of 10.1 kPa in argon at the first stage and at t = 1750°C, τ = 1 h, and a residual pressure in a chamber of 1.3 Pa at the second stage. Reaction products are studied by X-ray phase analysis using a D8 ADVANCE BRUKER AXS diffractometer. The results of experiments show the practical possibility of recovering titanium and calcium from perovskite by the carbothermic method.
Similar content being viewed by others
REFERENCES
Kalinnikov, V.T. and Nikolaev, A.I., Sozdanie bazovogo paketa tekhnologii dlya formirovaniya natsional’nogo rezerva strategicheskikh materialov na osnove rudno-syr’evogo potentsiala Kol’skogo poluostrova (Development of a Basic Package of Technologies for the Formation of a National Reserve of Strategic Materials Based on the Ore Resource Potential of the Kola Peninsula), in: Khimiko-metallurgicheskii kompleks i naukoemkie proizvodstva (Chemical and metallurgical complex and high-tech industries), Apatity: Kol’skii Nauchnyi Tsentr Ross. Akad. Nauk, 2005, pp. 191–206.
Kalinnikov, V.T., Nikolaev, A.I., and Gerasimova, L.G., Kola chemical-production cluster for solving problems of economy and ecology of the Russian Arctic, Sever Rynok: Formir. Ekonom. Poryad., 2014, no. 3, pp. 21–24.
Kulifeev, V.K., Kropachev, A.N., and Bidylo, A.P., The problem of perovskite—complex use of raw materials (Part 1), Tekhnol. Met., 2013, no. 3, pp. 3–9.
Nikolaeva, O.A., Prospects of development of production facilities for titanium feedstock deposits in the Kola Peninsula, Nats. Interesy: Prioritety Bezopasnost’, 2012, no. 47, pp. 31–36.
Kopkova, E.K., Gromov, P.B., Shchelokova, E.A., Muzhdabaeva, M.A., and Kadyrova, G.I., Solvometallurgy in processing of unconventional titanium–rare metal raw materials and anthropogenic products, in: Sintez znanii v estestvennykh naukakh. Rudnik budushchego: Proekty, tekhnologii, oborudovanie: Materialy Mezhdunarodnoi nauchnoi konferentsii (Synthesis of Knowledge in Natural Sciences. Mine of the Future: Projects, Technologies, Equipment: Mater. Int. Sci. Conf., Perm Gos. Nats. Issl. Univ., 2011, pp. 438–443.
Motov, D.L., Technology solution of the perovskite problem, Tr. Fersman. Nauch. Sess. GI KNTs Ross. Akad. Nauk, 2010, no. 7, pp. 187–192.
Gerasimova, L.G., Nikolaev, A.I., Petrov, V.B., Kalinnikov, V.T., Sklokin, L.I., and Maiorov, V.G., RF Patent 2244726, 2005.
Kalinnikov, V.T., Nikolaev, A.I., and Kotsar’, M.L., Unconventional rare-metal raw materials of the Kola Peninsula: The substantiation and prospects for its use in technology, Gorn. Inform.-Anal. Byull., 2007, no. 12, pp. 13–23.
Gerasimova, L.G., Mel’nik, N.T., Nikolaev, A.I., Petrov, V.B., Shchukina, E.S., and Bychenya, Yu.G., Hydrochloric acid technology of perovskite concentrate and its radiation evaluation, Ekol. Prom. Proizvod., 2015, no. 1 (89), pp. 54–58.
Krysenko, G.F., Epov, D.G., and Medkov, M.A., Complex processing of perovskite concentrate by fluoride technology, Vestn. Dal’nevost. Otd. Ross. Akad. Nauk, 2015, no. 4 (182), pp. 113–117.
Sheikh Abdul Rezan, Guangqing Zhang, and Oleg Ostrovski, Carbothermal reduction and nitridation of ilmenite concentrates, ISIJ Int., 2012, no. 3, pp. 363–368.
Jiusan Xiao, Bo Jiang, Kai Huang, Shuqiang Jiao, and Hongmin Zhu, Selective reduction of TiO2–SiO2 in the carbothermal reduction of titanium raw materials for preparation of titanium oxycarbide, in: The Minerals, Metals & Materials Society: 7th Int. Symp. on High-Temperature Metallurgical Processing, 2016, pp. 419–425. doi 10.1002/9781119274643.ch52.10.1002/9781119274643.ch52
Bozhko, G.G., Kulifeev, V.K., Elsukova, M.A., and Kropachev, A.N., RF Patent 2501871, 2013.
Chernyakhovskii, L.V., Tiunov, Yu.A., Yanchevskii, I.V., and Toroev, A.A., RF Patent 2383493, 2010.
Fruekhan, Richard J. (United States), RF Patent 2407816, 2010.
Pickles, C.A., Thermodynamic analysis of the selective carbothermic reduction of electric arc furnace dust, J. Hazard. Mater., 2008, vol. 150, no. 2, pp. 265–278. doi 10.1016/j.jhazmat.2007.04.097
Qianxu Ye, Hongbo Zhu, Libo Zhang, Peng Liu, Guo Chen, and Jinhui Peng, Carbothermal reduction of low-grade pyrolusite by microwave heating, RSC Adv., 2014, vol. 102, pp. 58164–58170. doi 10.1039/C4RA08010F
Lebukhova, N.V. and Karpovich, N.F., Carbothermic reduction of copper, nickel, and cobalt oxides and molybdates, Inorg. Mater., 2008, vol. 44, no. 8, pp. 889–892.
Mudzanapabwe, N.T., Chinyamakobvu, O.S., Simbi, D.J., In situ carbothermic reduction of a ferro-columbite concentrate in the recovery of Nb and Ta as metal matrix composite from tin smelting slag waste dump, Mater. Design., 2004, vol. 25, no. 4, pp. 297–302. doi 10.1016/j.matdes.2003.10.015
Ono, K. and Moriyama, J., Carbothermic reduction and electron beam melting of vanadium, J. Less Common Met., 1981, vol. 81, no. 1, pp. 79–89. doi 10.1016/0022-5088(81)90271-X
Welham, N.J., A parametric study of the mechanically activated carbothermic reduction of ilmenite, Miner. Eng., 1996, vol. 9, no. 12, pp. 1189–1200.
Database Documentation. http://www.crct.polymtl.ca/ fact/documentation/ (accessed: April 15, 2017).
Kulifeev, V.K., Kropachev, A.N., and Bidylo, A.P., The problem of perovskite—complex use of raw materials (Part 3), Tekhnol. Met., 2013, no. 5, pp. 3–9.
Falin, V.V. and Sukharev, A.V., Thermal methods of production of metallic calcium, in: Tekhnicheskie nauki – ot teorii k praktike: Materialy XXVI mezhdunarodnoi nauchno-prakticheskoi konferentsii (Engineering – from theory to practice: Mater. XXVI Int. Sci. and Pract. Conf.), Novosibirsk: SibAK, 2013, pp. 101–114.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by N. Korovin
About this article
Cite this article
Budin, O.N., Kropachev, A.N., Agafonov, D.G. et al. Investigation into the Carbothermic Method of Digestion of Titanium Raw Materials by the Example of Artificially Synthesized Perovskite. Russ. J. Non-ferrous Metals 59, 612–616 (2018). https://doi.org/10.3103/S1067821218060020
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821218060020