Abstract
The main characteristics and schematic of a device for extracting a focused electron beam into the atmosphere are described for a gun with a plasma emitter. It is shown that guns with a plasma emitter can be used to produce zinc oxide powders with particle sizes of around 100 nm in the atmosphere. Results are presented from the nonvacuum electron beam deposition of coatings based on carbides of refractory metals. The possibility of welding aluminum and copper parts with an electron beam at atmospheric pressure is demonstrated.
Similar content being viewed by others
REFERENCES
Osipov, I.V. and Rempe, N.G., Rev. Sci. Instrum., 2000, vol. 71, no. 4, p. 1638.
Grishkov, A.A., Kornilov, S.Yu., Rempe, N.G., Shidlovskiy, S.V., and Shklyaev, V.A., Plasma Phys. Rep., 2016, vol. 42, no. 7, p. 713.
Kornilov, S.Yu., Rempe, N.G., and Shidlovskii, S.V., Tech. Phys., 2016, vol. 61, no. 6, p. 841.
Girshovich, T.A., Turbulentnye strui v poperechnom potoke (Turbulent Streams in a Cross Flow), Moscow: Mashinostroenie, 1993.
Aksenov, A.I., Kornilov, S.Yu., Motorin, M.P., and Rempe, N.G., Instrum. Exp. Tech., 2017, vol. 80, no. 2, p. 233.
Kornilov, S., Rempe, N., Smirnyagina, N., et al., MATEC Web Conf., 2016, vol. 79, p. 01033.
Ilinykh, N.I. and Vassiliev, V.P., MATEC Web Conf., 2013, vol. 3, p. 01074.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by I. Obrezanova
About this article
Cite this article
Kornilov, S.Y., Rempe, N.G. A System for Extracting an Electron Beam into the Atmosphere Based on a Plasma Emitter Gun. Bull. Russ. Acad. Sci. Phys. 83, 1410–1414 (2019). https://doi.org/10.3103/S1062873819110133
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1062873819110133