Abstract
Some information on the wetting, charging, and sintering of pellets obtained during the introduction of a new automatic control system for the AKM-312 sintering machine at OAO Novolipetskii Metallurgicheskii Kombinat is considered, with the goal of improving the control system, formulating goals for the higher-level subsystem, gaining insights for the design of the next sintering-machine control system, and developing specifications for more efficient system utilization.
Similar content being viewed by others
References
Korotich, V.I., Goncharov, S.S., Pukhov, V.L., and Komornikov, G.I., Determining Rational Operating Conditions for Shuttle-Type Sintering-Machine Distributors, Byul. TsNIIChM, 1969, no. 17, pp. 17–72.
Kavasaki, M., Curr. Adv. Mater. Proc., 1990, no. 1, pp. 58–65.
Polotskii, L.I., Frolov, Yu.A., Isaenko, G.E., and Saprykin, A.N., Optimization of the Operating Conditions for Shuttle-Type Sintering-Machine Distributors, Tvorcheskoe nasledie B.I. Kitaeva: Trudy Mezhdunar. nauch.-prakt. konf. 11–14 fevralya 2009 (Kitaev’s Creative Heritage: Proceedings of an International Conference, February 11–14, 2009), Yekaterinburg: Ural State Technical University-Ural Polytechnic Institute, 2009, pp. 187–192.
Frolov, Yu.A., Polotskii, L.I., Kobelev, V.A., and Konoplyanik, V.V., Three-Dimensional Dynamic Model of Sintering, Chern. Metall.: Byul. NTI, 2005, no. 11, pp. 29–30.
Frolov, Yu.A., Konoplyanik, V.V., Isaenko, G.E., et al., Analysis of Drying, Condensation, and Gas Dynamics of the Bed in the Early Stages of Sintering, Stal’, 2008, no. 6, pp. 5–13.
Author information
Authors and Affiliations
Additional information
Original Russian Text © Yu.A. Frolov, V.N. Bogatikov, G.E. Isaenko, O.A. Semenov, A.N. Lelikov, V.P. Zykov, 2010, published in “Stal’,” 2010, No. 5, pp. 24–29.
About this article
Cite this article
Frolov, Y.A., Bogatikov, V.N., Isaenko, G.E. et al. Analysis of data from the new automatic control system at the AKM-312 sintering machine. Steel Transl. 40, 435–442 (2010). https://doi.org/10.3103/S0967091210050086
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091210050086