Russian Aeronautics

, Volume 61, Issue 1, pp 49–55 | Cite as

The 3D Computational Investigation of Film Cooling Effectiveness for Turbine Nozzle Vanes with “Meridian Constriction” and Shaped Film-Cooling Holes

  • Yu. G. GorelovEmail author
  • K. V. Tyul’kov
Aircraft and Rocket Engine Design and Development


Active influence dimension of film cooling along the blade profile is investigated with using the Spalart–Allmaras turbulence model. The cooling effectiveness of vane platforms and vane fillets is studied with the use of perforation holes on the leading edge.


rocket engine nozzle chemical kinetics mathematical modeling eigenvalue Jacobian matrix 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Dileep Chandran, P.M., Halder, P., Panda, R.K., and Prasad, B.V.S.S.S., A Comparative Study of Film Cooling Effectiveness on a Flat Plate with Adiabatic and Conjugate Conditions for Different Hole Shapes, Proc. of the ASME Turbo Expo, 2012, Copenhagen, Denmark. ASME GT2012-69142.Google Scholar
  2. 2.
    Ki-Don Lee and Kwang-Yong Kim, Shape Optimization of a Laidback Fan-Shaped Film-Cooling Hole to Enhance Cooling Performance, Proc. of the ASME Turbo Expo, 2010, Glasgow, ASME GT2010-22398, pp. 1447–1458.Google Scholar
  3. 3.
    Gorelov, Yu.G. and Tyul’kov, K.V., A Comparative Study of Film Cooling Effectiveness of Turbine Vanes with Cylindrical and Shaped Holes in Adiabatic and Conjugate Conditions, Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Problemy i perspektivy razvitiya dvigatelestroeniya” (Proc. Int. Sc. Tech. Conf. “Problems and Perspectives of Propulsion Engineering Development), Samara: Samara Univ., 2016, part 1, pp. 9–11.Google Scholar
  4. 4.
    Kinell, M., Utriainen, E., Hylén, J., Gustavsson, J., Bradley, A., Karlsson, M., and Wre, J., Fan Shaped and Cylindrical Holes Studied in a Vane Film Cooling Test Rig, Proc. of the ASME Turbo Expo, Glasgow, ASME GT2010-23308, pp. 1777–1784.Google Scholar
  5. 5.
    Nadali, H.N., Karlsson, M., Kinell, M., and Utriainen, E., CFD Based Sensitivity Analysis of Influencing Flow Parameters for Cylindrical and Shaped Holes in a Gas Turbine Vane, Proc. of the ASME Turbo Expo, June 11–15, 2012, Copenhagen, ASME GT2012-69023, pp. 1–9.Google Scholar
  6. 6.
    Baldauf, S., Scheurlen, M., and Schuls, A., CFD Based Sensitivity Study of Flow Parameters for Engine Like Film Conditions, Proc. of the Int. Gas Turbine and Aeroengine Congress and Exhibition, June 10–13, 1996, Birmingham, Paper no. 96-GT-310, pp. 1–9.Google Scholar
  7. 7.
    Gorelov, Yu.G. and Tyul’kov, K.V., Verification of 3D-Calculations to Film Cooling of Turbine Vanes in ANSYS CFX, Klimovskie Chteniya-2016: perspektivnye napravleniya razvitiya aviadvigatelestroeniya (Klimov’s Readings–2016: Perspective’s Trends of Propulsion Engineering Development), St. Petersburg: Skifiya-Print, 2016, pp. 105–113.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Salyut Gas Turbine Engineering Research and Production CentreMoscowRussia

Personalised recommendations