Russian Engineering Research

, Volume 39, Issue 8, pp 693–695 | Cite as

Production of Tool Coatings by Chemicothermal Plasma Methods

  • V. A. AleksandrovEmail author
  • L. G. PetrovaEmail author
  • A. S. SergeevaEmail author
  • V. D. AleksandrovEmail author
  • E. U. AkhmetzhanovaEmail author

Abstract—Two methods are considered for the production of wear-resistant coatings for cutting and stamping tools: plasma nitriding with subsequent oxidation; and plasma chemical vapor deposition of metals with preliminary nitriding. The microstructure of the modified layers, their microhardness, and the tool life are discussed.


plasma nitriding tools wear-resistant coatings modified coatings 



The work was supported by the Russian Science Foundation, project no. 17-19-01473.


  1. 1.
    Aleksandrov, V.A., et al., Cutting tool resistance increase by surface modification technique with tungsten compounds coatings application in high-frequency discharge, Uprochnyayushchie Tekhnol. Pokrytiya, 2018, vol. 14, no. 1 (157), pp. 30–35.Google Scholar
  2. 2.
    Belashova, I.S., Petrova, L.G., Aleksandrov, V.A., and Demin, P.E., Improving the properties of low-alloy and carbon steel tools by cyclic nitriding, Russ. Eng. Res., 2018, vol. 38, no. 1, pp. 53–56.CrossRefGoogle Scholar
  3. 3.
    Petrova, L.G., et al., Improvement of operation lifetime of machine parts with composite coatings in wear conditions, Int. J. Mech. Eng. Technol., 2017, vol. 8, no. 10, pp. 855–861.Google Scholar
  4. 4.
    Aleksandrov, V.A., Obtaining of a multilayer modified coatings on the surface of steel products to enhance operational characteristics, Uprochnyayushchie Tekhnol. Pokrytiya, 2014, no. 12, pp. 13–19.Google Scholar
  5. 5.
    Demin, P.E., Petrova, L.G., and Aleksandrov, V.A., Increase of corrosion resistance of steel covers in engines by methods of combined metallization by aluminum and titanium, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 9 (105), pp. 20–23.Google Scholar
  6. 6.
    Aleksandrov, V.A., Grachev, A.V., and Barabanov, S.I., Shortening of the process of nitriding of corrosion-resistant steels, Met. Sci. Heat Treat., 2011, vol. 53, nos. 7–8, pp. 344–346.CrossRefGoogle Scholar
  7. 7.
    Petrova, L.G., Aleksandrov, V.A., and Demin, P.E., Thermochemical treatment of steels in plasma of hydrostatic spark discharge, Met. Sci. Heat Treat., 2012, vol. 54, nos. 5–6, pp. 309–314.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Moscow Automobile and Road Construction State Technical University (MADI)MoscowRussia

Personalised recommendations