Advertisement

Russian Engineering Research

, Volume 39, Issue 5, pp 383–385 | Cite as

Manufacture of Housing Joints in Solid-Fuel Rocket Engines

  • A. S. ZuevEmail author
  • A. V. Lepeshkin
Article
  • 2 Downloads

Abstract

To decrease the metal content in the housings of solid-fuel rocket engines, the metallic joint reinforcement may be replaced by plastic components. A device for the production of reinforcement blanks by winding is developed. This system ensures polymerization and machining of the plastic.

Keywords:

joints reinforcement blanks mandrel winding rocket components engine housings 

Notes

REFERENCES

  1. 1.
    Lavrov, L.N., Sokolovskii, M.I., Bolotov, A.A., and Gapanenko, V.I., Konstruktsii raketnykh dvigatelei na tverdom toplive (Rocket Engine Constructions Using the Solid Fuel), Moscow: Mashinostroenie, 1993.Google Scholar
  2. 2.
    Vorobei, V.V. and Markin, V.B., Osnovy tekhnologii i proektirovanie korpusov raketnykh dvigatelei (Fundamental Technology and Engineering of Rocket Engine Cases), Novosibirsk: Nauka, 2003.Google Scholar
  3. 3.
    Zuev, A.S., Metal mandrel for production of polymeric composite materials by rolling method, Materialy XXXV Vserossiiskoi konferentsii “Nauka i tekhnologiya” (Proc. XXXV All-Russ. Conf. “Science and Technology”), Moscow: Ross. Akad. Nauk, 2015, vol. 5, no. 12.Google Scholar
  4. 4.
    Zuev, A.S., Manufacture of mandrels for the production of composite components by coiling, Russ. Eng. Res., 2016, vol. 36, no. 7, pp. 526–527.CrossRefGoogle Scholar
  5. 5.
    Shaidurova, G.I., Zuev, A.S., Emashev, A.Yu., and Antipin, V.E., Specific design of technological accessories for production of polymeric-composite materials by rolling method, Vestn. Permsk. Nats. Issled. Politekh. Univ., Aerokosm. Tekh., 2014, no. 36, pp. 64–76.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Perm National Research Polytechnic UniversityPermRussia
  2. 2.PAO NPO IskraPermRussia

Personalised recommendations