Russian Engineering Research

, Volume 39, Issue 5, pp 386–389 | Cite as

Influence of Ultrasonic Finishing on the Surface Roughness of Ship Components

  • V. I. MalyginEmail author
  • L. V. KremlevaEmail author
  • N. S. Oblovatskaya


The influence of plastic deformation by ultrasonic smoothing on the surface roughness of 17Kh18N9 and 20Kh1M1F1TR steel billet in finishing is studied. In the experiments, a D-optimal Hartley–Kono design for four factors is employed. The four factors are the speed of billet rotation, the supply, the clamping force, and the ultrasonic power.


ultrasonic finishing indenter ultrasonic power surface roughness plastic-deformation zone 



  1. 1.
    Shneider, Yu.G., Tekhnologiya finishnoi obrabotki davleniem (Technology of Finishing by Pressure), St. Petersburg: Politekhnika, 1996.Google Scholar
  2. 2.
    Shneider, Yu.G., Obrazovanie regulyarnykh mikrorel’efov na detalyakh i ikh ekspluatatsionnye svoistva detalei s regulyarnym rel’efom (Formation of Regular Microreliefs on the Parts and Their Operation Properties of the Parts with Regular Microrelief), Leningrad: Mashinostroenie, 1982.Google Scholar
  3. 3.
    Suslov, A.G., Kachestvo poverkhnostnogo sloya detalei mashin (Quality of Surface Layer of Machine Parts), Moscow: Mashinostroenie, 2000.Google Scholar
  4. 4.
    Papshev, D.D., Otdelochno-uprochnyayushchaya obrabotka poverkhnostno-plastichekim deformirovaniem (Finishing-Hardening Processing by Surface Plastic Deformation), Moscow: Mashinostroenie, 1978.Google Scholar
  5. 5.
    Gorokhov, V.A., Uluchshenie ekspluatatsionnykh svoistv detalei i instrumentov metodami vibronakatyvaniya i vibrovyglazhivaniya (Quality Improvement of the Parts and Tools by Vibrational Rolling and Vibrational Smoothing), Moscow: Nauchno-Issled. Inst. Mashinostr., 1983.Google Scholar
  6. 6.
    Alekhin, V.P., Fizika prochnosti i plastichnosti poverkhnostnykh sloev materialov (Physics of the Strength and Plasticity of Surface Layers of Materials), Moscow: Nauka, 1983.Google Scholar
  7. 7.
    Markov, A.I., Ul’trazvukovaya obrabotka materialov (Ultrasound Processing of the Materials), Moscow: Mashinostroenie, 1980.Google Scholar
  8. 8.
    Malygin, V.I., Kolomeets, N.P., and Oblovatskaya, N.S., The effect of ultrasound finishing on the surface layer of the parts, in Tekhnologiya sudovogo mashinostroeniya (Technology of Ship Machine Engineering), Severodvinsk: Gos. Ross. Tsnetr At. Sudostr., 2007, no. 6, pp. 27–31.Google Scholar
  9. 9.
    Kolomeets, N.P., Properties improvement of the products from constructional steels and alloys by ultrasound tools, Cand. Sci. (Eng.) Dissertation, Moscow: Moscow State Technol. Univ., Stankin, 2003.Google Scholar
  10. 10.
    Taratynov, O.V., Poroshin, V.V., and Kharchenko, V.V., Determining the height of surface projections after ultrasonic machining, Russ. Eng. Res., 2013, vol. 33, no. 1, pp. 53–56.CrossRefGoogle Scholar
  11. 11.
    Fedorov, A.A., Polonyankin, D.A., Blesman, A.I., and Postnikov, D.V., Research of AISI 321 steel microrelief after ultrasonic impact treatment with marker applying, IOP Conf. Ser.: Ser.: J. Phys., 2018, vol. 944.
  12. 12.
    Taratynov, O.V., Poroshin, V.V., and Kharchenko, V.V., Calculations of machined surface’s profile peaks height with an allowance for indentor imprints overlapping degree under ultrasonic machining, Russ. Eng. Res., 2013, vol. 33, no. 1, pp. 53–56.CrossRefGoogle Scholar
  13. 13.
    Amanov, A., Pyun, Y.S., and Vasudevan, V.K., High strength and wear resistance of tantalum by ultrasonic nanocrystalline surface modification technique at high temperatures, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 194, no. 1, art. ID 012032.Google Scholar
  14. 14.
    Stanzl-Tschegg, S., Fatigue crack growth and thresholds at ultrasonic frequencies, Fatigue, 2006, vol. 28, pp. 1456–1464.CrossRefzbMATHGoogle Scholar
  15. 15.
    Burlachenko, O.V. and Klochkova, D.P., Increase of the wear resistance of metal details on the basis of a simultaneous application of the high-test cover and ultrasonic vibrations, Procedia Eng., 2016, vol. 150, pp. 442–447.CrossRefGoogle Scholar
  16. 16.
    Pandey, V., Chattopadhyay, K., Santhi Srinivas, N.C., and Singh, V., Effect of stress relieving treatment on low cycle fatigue behavior of USSP treated 7075 aluminum alloy, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 194.
  17. 17.
    Nalimov, V.V. and Golikova, T.I., Logicheskie osnovaniya planirovaniya eksperimenta (Logic Basis of Experiment Planning), Moscow: Metallurgiya, 1976.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Lomonosov Northern (Arctic) Federal UniversitySeverodvinskRussia

Personalised recommendations