Advertisement

Russian Engineering Research

, Volume 39, Issue 4, pp 339–341 | Cite as

Precise Positioning of Laser Spot in the Restoration of Hob Teeth

  • V. V. ZvezdinEmail author
  • V. A. GrechishnikovEmail author
  • R. M. Khisamutdinov
  • V. A. PesoshinEmail author
  • R. R. Saubanov
  • M. V. Pashkov
  • S. S. Syrkin
Article

Abstract

The restoration of the cutting edge on hob teeth may be controlled by precise positioning of the laser spot. In experiments, the microstructure after laser surfacing and quenching is analyzed by means of metallographic data.

Keywords:

hob teeth restoration laser welding laser quenching laser radiation positional accuracy 

Notes

REFERENCES

  1. 1.
    Khisamutdinov, R.M., Pesoshin, V.A., Zvezdin, V.V., et al., Technology control of quenching of worm cutter, Mezhdunar. Zh. Prikl. Fundam. Issled., 2017, no. 4, pp. 323–327.Google Scholar
  2. 2.
    Chernova, M.A., Khisamutdinov, R.M., Zvezdin, V.V., et al., Metallographic studies of laser deposition of wear-resistant powders on the tool, Fundam. Issled., 2015, no. 114, pp. 753–758.Google Scholar
  3. 3.
    Khisamutdinov, R.M., Zvezdin, V.V., Pesoshin, V.A., et al., Simulation of laser hardening of the tools, Vestn. Chuvash. Gos. Univ., 2015, no. 3, pp. 193-199.Google Scholar
  4. 4.
    Zvezdin, V.V., Pesoshin, V.A., Saubanov, R.R., and Rakhimov, R.R., Control of a laser technological complex of tool hardening, Vestn. Chuvash. Gos. Univ., 2016, no. 3, pp. 188–193.Google Scholar
  5. 5.
    Zvezdin, V.V., Khamadeev, A.V., Fardiev, R.K., et al., Effect of mode composition of laser radiation on the heat-affected zone in metals, Vestn. Kazan. Gos. Tekh. Univ. im. A.A. Tupoleva, 2007, no. 2, pp. 84–85.Google Scholar
  6. 6.
    Zabelin, A.M., Orishich, A.M., and Chirkov, A.M., Lazernye tekhnologii mashinostroeniya: Uchebnoe posobie (Laser Technologies in Machine Engineering: Manual), Novosibirsk: Novosib. Gos. Univ., 2004.Google Scholar
  7. 7.
    Zvezdin, V.V., Khamadeev, A.V., Fardiev, R.K., et al., Effect of laser radiation composition on the heat-affected zone in metals, Vestn. Kazan. Gos. Tekh. Univ. im. A.A. Tupoleva, 2007, no. 2, pp. 84–85.Google Scholar
  8. 8.
    Khisamutdinov, R.M., Zvezdin, V.V., Saubanov, R.R., and Klochkova, K.V., Laser technology control of tool hardening and deposition welding, J. Adv. Res. Tech. Sci., 2016, no. 3, pp. 89–95.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Naberezhnye Chelny Institute, Kazan Federal UniversityNaberezhnye ChelnyRussia
  2. 2.Stankin Moscow State Technological UniversityMoscowRussia
  3. 3.Tupolev Kazan National Research Technical UniversityKazanRussia

Personalised recommendations