Advertisement

Russian Engineering Research

, Volume 39, Issue 4, pp 307–313 | Cite as

Penetration Diagrams Used in the Creation of Tribological Topocomposites

  • N. A. VoroninEmail author
Article

Abstract

Analytical formulas are obtained for the loading and unloading of topocomposites in tool indentation. On that basis, theoretical penetration diagrams are derived, for use in the creation of new tribological topocomposites.

Keywords:

topocomposites indentation penetration diagrams hardness elastic modulus composite hardness effective elastic modulus 

Notes

ACKNOWLEDGMENTS

Financial support was provided by the Russian Ministry of Education and Science (contract 14.607.21.0166; project RFMEF160717X0166.

REFERENCES

  1. 1.
    Mashinostroenie, Entsiklopediya, T. 4-1. Detali mashin. Konstruktsionnaya prochnost'. Trenie, iznos, smazka (Mechanical Engineering. Encyclopedia, Vol. 4-1: Machine Parts. Construction Strength. Friction, Wear, and Lubrication), Reshetov, D.N., Ed., Moscow: Mashinostroenie, 1995.Google Scholar
  2. 2.
    Voronin, N.A., The influence of strain hardening of a base material on the effective characteristics of a topocomposite, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 6, pp. 539–545.CrossRefGoogle Scholar
  3. 3.
    GOST (State Standard) R 8.748–2011: State System for Ensuring the Uniformity of Measurements, Metallic Materials. Instrumented Indentation Test for Hardness and Materials Parameters, Part 1. Test Method, Moscow: Standartinform, 2013.Google Scholar
  4. 4.
    Fischer-Cripps, A.C., Nanoindentation, New York: Springer-Verlag, 2008, 3rd ed.Google Scholar
  5. 5.
    Fischer-Cripps, A.C., Critical review of analysis and interpretation of nanoindentation test data, Surf. Coat. Technol., 2006, vol. 200, pp. 4153–4165.CrossRefGoogle Scholar
  6. 6.
    Models for thin films. https://github.com/DavidMercier/NIMS/blob/master/doc/models_thin_films.rst.Google Scholar
  7. 7.
    Sakharova, N.A., Oliveira, M.C., Antunes, J.M., and Fernandesa, J.V., On the determination of the film hardness in hard film/substrate composites using depth-sensing indentation, Ceram. Int., 2013, vol. 39, pp. 6251–6263.CrossRefGoogle Scholar
  8. 8.
    Voronin, N.A., Effect of coating thickness and substrate material on mechanical properties and carrying capacity of hardened surfaces, in Metody uprochneniya poverkhnostei detalei mashin (Methods of Surface Hardening of Machine Parts), Moskvitin, G.V., Ed., Moscow: Krasand, 2008, pp. 91–122.Google Scholar
  9. 9.
    Voronin, N.A., Composite, effective, and real harnesses of thin coatings, J. Frict. Wear, 2010, vol. 31, no. 4, pp. 241–252.CrossRefGoogle Scholar
  10. 10.
    Ngo Kao Kyong, Extracontact deformations at local loading, Vestn. Nauki Obraz. Sev.-Zap. Ross., 2015, vol. 1, no. 3, pp. 1–8 http://vestnik-nauki.ru/.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Blagonravov Institute of Mechanical Engineering, Russian Academy of SciencesMoscowRussia

Personalised recommendations