Advertisement

Russian Engineering Research

, Volume 39, Issue 4, pp 334–336 | Cite as

Adaptive Lathe Tools with Modified Geometry

  • V. A. GrechishnikovEmail author
  • V. B. RomanovEmail author
  • N. O. SychevaEmail author
  • O. I. YurasovaEmail author
Article
  • 1 Downloads

Abstract

A design is proposed for the attachment of a replaceable polyhedral insert in the housing of a pass-through lathe cutter with two fixed positions of the insert. This design permits modification of the tool geometry.

Keywords:

cutter supporting plate cutting insert tool geometry 

Notes

REFERENCES

  1. 1.
    Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Prediction and measurement of the parameters of the microtopography of a surface when turning intricately shaped parts, Meas. Tech., 2015, vol. 58, no. 8, pp. 848–853.CrossRefGoogle Scholar
  2. 2.
    Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Lathe turning of complex-shaped parts providing desired surface microrelief, Russ. Eng. Res., 2016. Vol. 36, no. 3. P. 229-231.CrossRefGoogle Scholar
  3. 3.
    Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Lathe turning of complex-shaped parts providing desired surface microrelief, Russ. Eng. Res., 2016, vol. 36, no. 3, pp. 229–231.CrossRefGoogle Scholar
  4. 4.
    Grechishnikov, V.A., Maslov, A.R., and Pivkin, P.M., Tool system for face grooving using CNC machines, Russ. Eng. Res., 2015, vol. 35, no. 11, pp. 814–817.CrossRefGoogle Scholar
  5. 5.
    Grechishnikov, V.A., Grigor’ev, S.N., Solomentsev, A.G., et al., Protsessy i operatsii formoobrazovaniya i instrumental’naya tekhnika: Uchebnik dlya vuzov (Processes and Operations for Forming and Instrumental Technique: Manual for Higher Education Institutions), Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2006.Google Scholar
  6. 6.
    Khusainov, R.M., Yurasov, S.Yu., Ziyatdinov, R.R., et al., Precision of surfaces machined on a lathe with geometric errors, Russ. Eng. Res., 2017, vol. 37, no. 3, pp. 266–269.CrossRefGoogle Scholar
  7. 7.
    Grechishnikov, V.A., Domnin, P.V., Kosarev, V.A., et al., Shaping by means of complex cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 461–465.CrossRefGoogle Scholar
  8. 8.
    Grechishnikov, V.A., Pivkin, P.M., and Romanov, V.B., Tools for face grooving, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2017, no. 8-2, pp. 75–80.Google Scholar
  9. 9.
    Grechishnikov, V.A., Petukhov, Yu.E., Kosarev, V.A., et al., Instrumental’naya tekhnika, tekhnologiya izgotovleniya v SAPR RI: Uchebnoe posobie (Instrumental Technique and Production Technology in CAD RI: Manual), Grechishnikov, V.A., Ed., Moscow: Mosk. Gos. Tekh. Univ., Stankin, 2015.Google Scholar
  10. 10.
    Kosarev, D.V., Grechishnikov, V.A., and Kosarev, V.A., Reducing the vibration when cutting internal threads by mills equipped with replaceable hard-alloy plates, Russ. Eng. Res., 2010, vol. 30, no. 9, pp. 948–950.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Stankin Moscow State Technological UniversityMoscowRussia
  2. 2.Naberezhnye Chelny Institute, Kazan Federal UniversityNaberezhnye ChelnyRussia

Personalised recommendations