Russian Engineering Research

, Volume 39, Issue 4, pp 337–338 | Cite as

Hobbing Tool for Tooth Finishing in Involute Gears

  • A. N. GolovkoEmail author
  • S. Yu. YurasovEmail author


An improved hobbing tool for the finishing of involute-gear teeth is proposed.


hobbing tool finishing involute gear 



  1. 1.
    Matalin, A.A., Tekhnologiya mashinostroeniya (Technology of Machine Engineering), St. Petersburg: Lan’, 2016.Google Scholar
  2. 2.
    Grechishnikov, V.A., Grigor’ev, S.N., Kirsanov, S.V., et al., Metallorezhushchie instrumenty: Uchebnik (Metal Cutting Tools: Manual), Moscow: Yanus-K, 2005.Google Scholar
  3. 3.
    Ryabov, E.A., Yurasov, S.Yu., and Yurasova, O.I., Parametric modeling of ball end mills, Russ. Eng. Res., 2016, vol. 36, no. 9, pp. 784–785.CrossRefGoogle Scholar
  4. 4.
    Khusainov, R.M., Yurasov, S.Yu., and Kazargel’dinov, R.R., Preparations for production in unigraphics NX software, Russ. Eng. Res., 2017, vol. 37, no. 4, pp. 363–366.CrossRefGoogle Scholar
  5. 5.
    Kasjanov, S.V., Kondrashov, A.G., and Safarov, D.T., Regulation of geometrical parameters deviations of automotive components parts through diagnostic measurements organization, Procedia Eng., 2017, vol. 206, pp. 1508–1514.CrossRefGoogle Scholar
  6. 6.
    Grechishnikov, V.A. and Yurasov, S.Yu., Mathematical models and control of cutting edges of disk and worm milling cutters, Stanki Instrum., 2006, no. 4, pp. 19–22.Google Scholar
  7. 7.
    Radzevich, S.P., USSR Inventor’s Certificate no. 1106609, Byull. Izobret., 1984, no. 29.Google Scholar
  8. 8.
    Radzevich, S.P., USSR Inventor’s Certificate no. 1004030, Byull. Izobret., 1983, no. 10.Google Scholar
  9. 9.
    Chemborisov, N.A., Khisamutdinov, R.M., and Avdeev, V.A., RF Patent 103771, Byull. Izobret., 2011, no. 12.Google Scholar
  10. 10.
    Smorkalov, N.V., Skripin, V.P., Ptitsyn, V.P., and Belugin, Yu.F., RF Patent 2005013, Byull. Izobret., 1993, nos. 47–48.Google Scholar
  11. 11.
    Golovko, A.N. and Golovko, I.V., Kinematic calculation of the error in gear shaving, Russ. Eng. Res., 2011, vol. 31, no. 10, pp. 1034–1035.CrossRefzbMATHGoogle Scholar
  12. 12.
    Golovko, A.N. and Golovko, I.V., Determining the profile error of a gear-cutter tooth with modified roller motion, Russ. Eng. Res., 2015, vol. 35, no. 2, pp. 154–155.CrossRefGoogle Scholar
  13. 13.
    Golovko, A., Determination of the profile of the worm-type tool, MATEC Web Conf., 2017, vol. 129, no. 01043.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Naberezhnye Chelny Institute, Kazan Federal UniversityNaberezhnye ChelnyRussia

Personalised recommendations