Advertisement

Russian Engineering Research

, Volume 39, Issue 3, pp 195–198 | Cite as

Failure of Threaded Joints between Composite Components

  • M. N. ZakharovEmail author
  • M. A. Lyubchenko
  • I. V. Magnitskii
Article
  • 10 Downloads

Abstract

The failure of threaded joints between composites with 4DL reinforcement is analyzed. A formula is proposed for estimating the carrying capacity of a threaded joint at the design stage.

Keywords:

carbon–carbon composite threaded joint limiting load carrying capacity 

Notes

REFERENCES

  1. 1.
    Zakharov, M.N. and Lyubchenko, M.A., Analysis of maximum loads for the screw joints from carbon-carbon composites, Konstr. Kompoz. Mater., 2017, no. 4, pp. 82–87.Google Scholar
  2. 2.
    Andrienko, L.A., Baikov, B.A., and Zakharov, M.N., Detali mashin (Machine Parts), Ryakhovskii, O.A., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014.Google Scholar
  3. 3.
    Gomes, J.R., Silva, O.M., Silva, C.M., et al., The effect of sliding speed and temperature on the tribological behavior of carbon-carbon composites, Wear, 2001, vol. 249, pp. 240–245.CrossRefGoogle Scholar
  4. 4.
    Zakharov, M.N., Destruction criterion of pipe steels in zones of sharp and smooth concentrators, Izv. Vyssh. Uchebn. Zaved., Neft Gaz (Tyumen, Russ. Fed.), 2000, no. 3, pp. 74–81.Google Scholar
  5. 5.
    Bulatova, A.Z., Zakharov, M.N., and Morozov, E.M., Assessing the risk of peeling in metal structures on the basis of the crack-resistance diagram, Zavod. Lab., Diagn. Mater., 2010, no. 3, pp. 41–46.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  • M. N. Zakharov
    • 1
    Email author
  • M. A. Lyubchenko
    • 2
  • I. V. Magnitskii
    • 2
  1. 1.Bauman Moscow State Technical UniversityMoscowRussia
  2. 2.OAO KompozitKorolevRussia

Personalised recommendations