Russian Engineering Research

, Volume 39, Issue 3, pp 276–278 | Cite as

Calibration of X-Ray Diffraction Instruments for Residual-Stress Measurement

  • V. N. TrofimovEmail author
  • V. V. KarmanovEmail author
  • A. A. ShiryaevEmail author
  • S. N. ZvonovEmail author


The deficiencies of existing standard iron and nickel samples for calibration by means of X-ray diffraction are noted. These standards cannot be used in calibration by magnetic noise recording. A new calibration method based on X-ray diffraction is proposed, using plane samples of the material employed in the manufacture of the actual structures. Theoretical analysis provides the basis for the development of null standards in which a plane sample is deformed by pure flexure or in a cantilever-beam configuration.


residual stress nondestructive monitoring standard samples calibration X-ray diffraction Barkhausen noise elasticity pure flexure cantilever beams plates magnetic noise 



  1. 1.
    Davidenkov, N.N. and Spiridonova, N.I., Analysis of the stress state in the neck of the stretched sample, Zavod. Lab., 1945, no. 6, pp. 583–586.Google Scholar
  2. 2.
    Birger, I.A., Ostatochnye napryazheniya (Residual Stresses), Moscow: Mashinostroenie, 1963.Google Scholar
  3. 3.
    Vishnyakov, Ya.D. and Piskarev, V.D., Upravlenie ostatochnymi napryazheniyami v metallakh i splavakh (Control of Residual Stresses in Metals and Alloys), Moscow: Metallurgiya, 1989.Google Scholar
  4. 4.
    Vasil’ev, D.M., Diffraktsionnye metody issledovnaiya (Methods of Diffraction Analysis), Moscow: Metallurgiya, 1977.Google Scholar
  5. 5.
    Nerazrushayushchii kontrol’: Spravochnik. Tom 1. Kniga 1. Vizual’nyi i izmeritel’nyi kontrol’ (Nondestructive Testing: Handbook, Vol. 1, Book 1: Visual and Measurement Testing), Klyuev, V.V., Ed. Moscow: Mashinostroenie, 2006; Nerazrushayushchii kontrol’: Spravochnik. Tom 1. Kniga 2. Radiatsionnyi kontrol’ (Nondestructive Testing: Handbook, Vol. 1, Book 2: Radiation Testing), Klyuev, V.V., Ed. Moscow: Mashinostroenie, 2008.Google Scholar
  6. 6.
    Metallovedenie i termicheskaya obrabotka stali. Spravochnik. Tom 1. Metody ispytanii i issledovaniya (Metal Science and Thermal Treatment of Steel: Handbook, Vol. 1: Testing Methods), Bernshtein, M.L. and Rakhshtadt, A.G., Eds., Moscow: Metallurgiya, 1983.Google Scholar
  7. 7.
    Rivkin, E.Yu. and Filatov, V.M., Prochnost’ splavov tsirkoniya (The Strength of Zirconium Alloys), Moscow: Atomizdat, 1974.Google Scholar
  8. 8.
    Feodos’ev, V.I., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1970.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Perm State Polytechnic UniversityPermRussia
  2. 2.OOO XenaPermRussia

Personalised recommendations