Advertisement

Russian Engineering Research

, Volume 39, Issue 3, pp 242–245 | Cite as

Robots in the Production of Polymer-Composite Components

  • A. S. DudarevEmail author
Article

Abstract

Two robot systems for the shaping and machining of polymer-composite products are described. In the shaping system, an industrial robot lays out the fibers as prepreg tape. In the machining system, the boring and milling of polymer composites is improved. This system is adapted for the machining of sound-absorbing structures in airplane engines,

Keywords:

robot polymer composites prepreg sandwich panel sound-absorbing structures drilling milling 

Notes

REFERENCES

  1. 1.
    Anoshkin, A.N., Teoriya i tekhnologiya namotki konstruktsii iz polimernykh kompozitsionnykh materialov: uchebnoe posobie (Theory and Technology of Winding Structures from Polymeric Composites), Perm: Permsk. Gos. Tekh. Univ., 2003.Google Scholar
  2. 2.
    Vaniglia, M.M., US Patent 5110395, 1989.Google Scholar
  3. 3.
    Grinev, M.A., New robot used by Perm engineers, Permsk. Aviats. Dvigateli, 2013, no. 27, pp. 56–58.Google Scholar
  4. 4.
    Dudarev, A.S., Automated punching of apertures in noise-proof panels of aircraft engines from polymeric composite materials, Probl. Mashinostr. Avtom., 2012, no. 3, pp. 63–68.Google Scholar
  5. 5.
    Dudarev, A.S., Svirshchev, V.I., and Bayandin, M.A., Robotic complex for hole punching and milling of noise-proof panels of aircraft engines from polymer composite materials, Avtom. Sovrem. Tekhnol., 2013, no. 1, pp. 9–14.Google Scholar
  6. 6.
    Lomaev, V.I. and Dudarev, A.S., Machining of holes in the manufacture of products from fibrous composite materials for civil aircrafts, Tekhnol. Mashinostr., 2006, no. 7, pp. 18–22.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Perm National Research Polytechnic UniversityPermRussia

Personalised recommendations