Russian Engineering Research

, Volume 39, Issue 2, pp 125–128 | Cite as

Micromachining of Titanium-Alloy Components

  • Yu. A. MorgunovEmail author
  • B. P. Saushkin
  • G. B. Saushkin


The electrochemical machining of (10–30)-μm depressions on titanium-alloy parts is investigated, with variation in the conditions of electrolysis. Recommendations for electrochemical engraving are formulated.


electrochemical machining electrolytic conditions titanium alloy 



  1. 1.
    Astakhov, Yu.P., Kochergin, S.A., Morgunov, Yu.A., et al., Microprocessing of surface reliefs by physical and chemical methods, Naukoemkie Tekhnol. Mashinostr., 2012, no. 7, pp. 33–38.Google Scholar
  2. 2.
    Saushkin, B.P., Atanasyants, A.G., and Sychev, G.A. Problems and outlook of the development of pulse electrochemical machining, Electron. Mach. Mater., 2003, no. 2, pp. 10–22.Google Scholar
  3. 3.
    Venkov, V.S., Saushkin, B.P., and Dikusar, A.I., Analysis of production technologies of surface understatements at 10–20 µm depth, Uprochnyayushchie Tekhnol. Pokrytiya, 2008, no. 6, pp. 48–53.Google Scholar
  4. 4.
    Saushkin, G.B. and Morgunov, Yu.A., Electrochemical deposition of data on the surface of machine parts, Uprochnyayushchie Tekhnol. Pokrytiya, 2009, no. 12, pp. 45–49.Google Scholar
  5. 5.
    Morgunov, Yu.A., Saushkin, G.B., and Vilidanov, T.V., Electrochemical engraving of aerodynamic downwards in the balance with a flow channel, Metalloobrabotka, 2010, no. 2, pp. 70–74.Google Scholar
  6. 6.
    Saushkin, G.B. and Morgunov, Yu.A., Theoretical analysis of the electrochemical grading of aerodynamic downwards, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2011, no. 1, pp. 184–188.Google Scholar
  7. 7.
    Lomaev, V.I., Morgunov, Yu.A., Saushkin, B.P., et al., Elektrokhimicheskaya obrabotka izdelii aviatsionno-kosmicheskoi tekhniki: uchebnoe posobie (Electrochemical Treatment of the Products for Aerospace Equipment: Manual), Saushkin, B.P., Ed., Moscow: Forum, 2013.Google Scholar
  8. 8.
    Saushkin, B.P., Electrical discharge in liquid and gas medium is the base of a new generation of methods and technologies in machine building production, Electron. Mach. Mater., 2004, no. 3, pp. 4–17.Google Scholar
  9. 9.
    Saushkin, B.P., Electrochemical finishing of materials, Metalloobrabotka, 2001, no. 1, pp. 27–30.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  • Yu. A. Morgunov
    • 1
    Email author
  • B. P. Saushkin
    • 1
  • G. B. Saushkin
    • 1
  1. 1.Moscow Polytechnic UniversityMoscowRussia

Personalised recommendations