Advertisement

Russian Engineering Research

, Volume 39, Issue 2, pp 122–124 | Cite as

Improving Ceramic-Cutter Performance

  • S. V. BryakunovEmail author
  • Yu. N. Zhukov
  • I. N. Tikhonov
  • A. A. Blau
Article
  • 1 Downloads

Abstract

A method of increasing the performance of a ceramic cutter by changing the alloy structure is considered for the example of a single-carbide hard alloy.

Keywords:

cutter hard alloy tool performance cementing matrix grain size 

Notes

REFERENCES

  1. 1.
    Artamonov, E.V., Prochnost’ i rabotosposobnost’ smennykh tverdoslavnykh plastin sbornykh rezhushchikh instrumentov: monografiya (Strength and Performance of Replaceable Hard-Alloy Plates in Composite Tools: Monograph), Tyumen: Tyumen. Gos. Neftegaz. Univ., 2003.Google Scholar
  2. 2.
    Artamonov, E.V., Vasilega, D.S., Ostapenko, M.S., and Shraider, V.A., Rabotosposobnost’ instrumentov i fiziko-mekhanicheskie kharakteristiki instrumental’nykh tverdykh splavov i obrabatyvaemykh materialov: monografiya (Efficiency of Tools and Physical-Mechanical Characteristics of Hard Alloys for Tools and Processed Materials: Monograph), Uteshev, M.Kh., Ed., Tyumen: Vektor Buk, 2008.Google Scholar
  3. 3.
    Artamonov, E.V., Chernishov, M.O., Pomigalova, T.E., and Vasil’ev, D.V., Extending the life of replaceable cutting plates in composite tools, Russ. Eng. Res., 2015, vol. 35, no. 1, pp. 61–63.CrossRefGoogle Scholar
  4. 4.
    Trent, E.M., Metal Cutting, London: Butterworth, 1976.Google Scholar
  5. 5.
    Zak Fang, Z., Wang, X., Ryu, T., et al., Synthesis, sintering, and mechanical properties of nanoc-rystalline cemented tungsten carbide—A review, Int. J. Refract. Met. Hard Mater., 2009, vol. 27, no. 2, pp. 288–299.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  • S. V. Bryakunov
    • 1
    Email author
  • Yu. N. Zhukov
    • 1
  • I. N. Tikhonov
    • 1
  • A. A. Blau
    • 1
  1. 1.Yeltsin Ural Federal UniversityYekaterinburgRussia

Personalised recommendations