Advertisement

Russian Engineering Research

, Volume 39, Issue 2, pp 150–153 | Cite as

More Efficient Machining by Modifying the Shaping Cycles on a CNC Machine Tool

  • V. I. SvirshchevEmail author
  • A. N. SavlovEmail author
  • A. K. VaseninEmail author
  • R. K. ShakirovEmail author
Article
  • 2 Downloads

Abstract

The efficiency in machining the nipple of a submersible electric motor may be increased by modifying the machining cycles for the elementary surfaces on a WFL M35-G CNC machine tool.

Keywords:

machining efficiency nipple submersible electric motor CNC machine tools elementary surfaces surface shaping 

Notes

REFERENCES

  1. 1.
    Sergienko, A.V., Merkushev, D.A., Sentyabov, V.P., and Martyushev, D.N., RF Patent 2394332, 2010.Google Scholar
  2. 2.
    Matalin, A.A., Tekhnologiya mashinostroeniya: Uchebnik (Technology of Machine Engineering: Manual), St. Petersburg: Lan’, 2010.Google Scholar
  3. 3.
    Spravochnik tekhnologa-mashinostroitelya (Handbook of Technologist-Machine Engineer), Dal’skii, A.M., Kosilova, A.G., Meshcheryakova, R.K., and Suslova, A.G., Eds., Moscow: Mashinostroenie, 2003, vol. 1.Google Scholar
  4. 4.
    Svirshchev, V.I., Flegentov, V.K., Podbornov, I.V., and Savlov, A.N., Selection of the cutting plate for a composite tool in machining elementary surfaces, Russ. Eng. Res., 2014, vol. 34, no. 7, pp. 469–472.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Perm National Research Polytechnic UniversityPermRussia
  2. 2.ZAO NovometPermRussia

Personalised recommendations