Russian Engineering Research

, Volume 39, Issue 2, pp 185–187 | Cite as

Diagnostics and Recycling of Discarded Automobile Components

  • A. I. ShveyovEmail author
  • T. V. Shveyova


Recycling of metal from discarded auto components is expedient and economically efficient. Uses of metal from discarded components are proposed. Information is presented regarding the mechanical properties of structural steels widely used in the auto industry. Technology for recycling of the metal in truck components is identified.


machine parts defects metal recycling diagnostics mechanical properties 



  1. 1.
    Dekhterinskii, L.V., Kapital’nyi remont avtomobilei (Major Repair of Cars), Moscow: Transport, 1989.Google Scholar
  2. 2.
    Karagodin, V.I. and Mitrokhin, N.N., Remont avtomobilei i dvigatelei (Reparation of Automobiles and Engines), Moscow: Akademiya, 2002.Google Scholar
  3. 3.
    Azamatov, R.A., Dazhin, V.G., Kulakov, A.T., et al., Vosstanovlenie detalei avtomobilya KAMAZ (Reparation of the KAMAZ Automobile Parts), Naberezhnye Chelny: KAMAZ, 1994.Google Scholar
  4. 4.
    Volzhin, G.N., Verdnikov, V.G., and Rovkakh, S.E., Vosstanovlenie iznoshennykh detalei stroitel’nykh mahsin (Reparation of Worn Parts of Building Machines), Moscow: Stroiizdat, 1968.Google Scholar
  5. 5.
    Dotsenko, N.I., Vosstanovlenie avtomobil’nykh detalei svarkoi i naplavkoi (Reparation of Automobile Parts by Welding and Dopping), Moscow: Transport, 1972.Google Scholar
  6. 6.
    Novikov, A.N., Stratulat, M.P., and Sevost’yanov, M.P., Vosstanovlenie i uprochnenie detalei avtomobilei: Uchebnoe posobie (Reparation and Hardening of Automobile Parts: Manual), Orel: Orlovsk. Gos. Tekh. Univ., 2006.Google Scholar
  7. 7.
    Kharazov, A.M., Diagnosticheskoi obespechenie tekhnicheskogo obsluzhivaniya i remonta avtomobilei (Diagnostics of Technical Service and Reparation of Cars), Moscow: Vysshaya Shkola, 1990.Google Scholar
  8. 8.
    Aldonin, N.V., Rejection of knots and parts of recyclable equipment, Dostizh. Nauki Tekh. APK, 2010, no. 8, pp. 69–71.Google Scholar
  9. 9.
    Astashchenko, V.I., Shveev, A.I., Shveeva, T.V., and Shveev, I.A., Reparation technology of worn cemented car parts, Avtomob. Prom-st., 2011, no. 4, pp. 31–32.Google Scholar
  10. 10.
    Gliner, R.E. and Astashchenko, V.I., Vvedenie v upravlenie kachestvom metalla (Introduction into the Control of Metal Quality), Kazan: Kazan. Gos. Univ., 2015.Google Scholar
  11. 11.
    Tylkin, M.A., Spravochnik termista remontnoi sluzhby (Handbook of Service Heat-Treatment Operator), Moscow: Metallurgiya, 1981.Google Scholar
  12. 12.
    GOST (State Standard) 1050–2013: Metal Products from Nonalloyed Structural Quality and Special Steels, General Specification, Moscow: Standartinform, 2014.Google Scholar
  13. 13.
    GOST (State Standard) 4543–2016: Structural Alloy Steel Products. Specifications, Moscow: Standartinform, 2017.Google Scholar
  14. 14.
    Kremenskii, I.G., Modern technologies for blank production from worn parts, Zagotovitel’nye Proizvod. Mashinostr., 2017, vol. 15, no. 2, pp. 94–96.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Naberezhny Chelny Institute, Kazan Federal UniversityKazanRussia

Personalised recommendations