Advertisement

Russian Engineering Research

, Volume 39, Issue 2, pp 177–179 | Cite as

Restoring Worn Components in Automobile Timing Mechanisms

  • A. I. ShveyovEmail author
  • E. I. Shveyova
  • I. A. Shveyov
Article

Abstract

In operation, the end of the valve tappet in an automobile’s timing mechanism undergoes not only wear but also fatigue crumbling. Several methods of removing the worn cast-iron layer are proposed to restore the gas-distributor components.

Keywords:

timing mechanism crank engine parts plastic deformation working life surfacing reliability durability 

Notes

REFERENCES

  1. 1.
    Kolomeichenko, A.V., Restoration of heavily worn parts from aluminum alloy, Remont, Vosstanov., Modernizatsiya, 2002, no. 4, pp. 29–30.Google Scholar
  2. 2.
    Namakonov, B.V., Ecology of manufacturing and restoration of machine parts, Avtomob. Prom-st., 1996, no. 2, pp. 4–5.Google Scholar
  3. 3.
    Sorokin, N.T., Truck transport of Russian: demands and opportunities, Avtomob. Prom-st., 2002, no. 4, pp. 11–13.Google Scholar
  4. 4.
    Gubkin, S.I., Plasticheskaya deformatsiya metallov (Plastic Deformation of Metals), Moscow: Metallurgizdat, 1961, vol. 1.Google Scholar
  5. 5.
    Dazhin, V.G., The use of reliability standards at the repair company, Nadezhnost Kontrol Kach., 1977, no. 5, pp. 24–31.Google Scholar
  6. 6.
    Kanorchuk, V.E. and Chigrind, A.D., Vosstanovlenie avtomobil’nykh detalei. Tekhnologiya i oborudovanie: Uchebnoe posobie dlya vuzov (Repair of Automobile Parts: Technology and Equipment: Manual for Higher Education Institutions), Moscow: Transport, 1995.Google Scholar
  7. 7.
    Minkevich, A.N., Khimiko-termicheskaya obrabotka stali (Chemical-Thermal Processing of Steel), Moscow: Mashgiz, 1950.Google Scholar
  8. 8.
    Bashnin, Yu.A. and Ushakov, B.K., Tekhnologiya termicheskoi obrabotki stali: Uchebnik dlya vuzov (Technology of Thermal Processing of Steel: Manual for Higher Education Institutions), Moscow: Metallurgiya, 1986.Google Scholar
  9. 9.
    Bernshtein, M.L. and Zaimovskii, V.A., Termomekhanicheskaya obrabotka stali (Thermomechanical Processing of Steel), Moscow: Metallurgiya, 1983.Google Scholar
  10. 10.
    Kostin, P.P., Fiziko-mekhanicheskie ispytaniya metallov, splavov i metallicheskikh materialov (Physical-Mechanical Testing of Metals, Alloys, and Metal Materials), Moscow: Mashinostroenie, 1990.Google Scholar
  11. 11.
    Levashov, E.A., Rogachev, A.S., and Yukhvid, V.I., Fiziko-khimicheskie i tekhnologicheskie osnovy samorasprostranyayushchegosya vysokotemperaturnogo sinteza (Physicochemical and Technological Principles of Self-Propagating High-Temperature Synthesis), Moscow: Binom, 1999.Google Scholar
  12. 12.
    Masterov, V.A. and Berkovskii, V.S., Teoriya plasticheskoi deformatsii i obrabotka metallov davleniem (Theory of Plastic Deformation and Processing of Metals by Pressure), Moscow: Metallurgiya, 1989.Google Scholar
  13. 13.
    Batishchev, A.N. and Lyalyakin, V.P., Vosstanovlenie detalei sel’skokhozyaistvennoi tekhniki (Repair of the Parts for Agricultural Machines), Moscow: Informagrotekh, 1995.Google Scholar
  14. 14.
    Volovik, E.L., Spravochnik po vosstanovleniyu detalei (Handbook on Reparation of the Machine Parts), Moscow: Kolos, 1981.Google Scholar
  15. 15.
    Vol’pert, G.D., Vosstanovlenie iznoshennykh detalei (Reparation of Worn Machine Parts), Moscow: Mashinostroenie, 1967.Google Scholar
  16. 16.
    Namakonov, B.V., Industrial environmental products, Vestn. Mashinostr., 2001, no. 5, pp. 68–71.Google Scholar
  17. 17.
    Namakonov, B.V., Ecology of manufacturing and restoration of machine parts, Avtomob. Prom-st., 1996, no. 2, p. 4.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  • A. I. Shveyov
    • 1
    Email author
  • E. I. Shveyova
    • 1
  • I. A. Shveyov
    • 1
  1. 1.Naberezhny Chelny Institute, Kazan Federal UniversityKazanRussia

Personalised recommendations