Advertisement

Russian Engineering Research

, Volume 39, Issue 2, pp 174–176 | Cite as

Forced Vibration of an Annular Cross Section in Combined Cutting and Deformation

  • Yu. V. MaksimovEmail author
  • A. V. AnkinEmail author
  • E. A. VetrovaEmail author
  • D. I. ObraztsovEmail author
Article

Abstract

The shaping process in the combined cutting and deformation of flexible hollow shafts is considered. Deformation of the cross section is taken into account.

Keywords:

production system hollow cylinder combined cutting and deformation rod model cross-sectional oscillation flexural vibration machining error 

Notes

REFERENCES

  1. 1.
    Maksimov, Yu.V., Ankin, A.V., and Vetrova, E.A., The combined processing of non-rigid hollow parts taking into account torsional vibrations, Trakt. S-kh. Mash., 2007, no. 7, pp. 54–56.Google Scholar
  2. 2.
    Vetrova, E.A., Lebedev, P.A., and Adeev, A.S., The effect of the cross sectional shape error of non-rigid hollow cylinders on the depth of cutting in the combined cutting and deformation, Sovrem. Tekh. Tekhnol., 2014, no. 12. http://technology.snauka.ru/2014/12/5219. Accessed January 19, 2014.Google Scholar
  3. 3.
    Maksimov, Yu.V., Ankin, A.V., and Vetrova, E.A., Vibration of the cross section of a non-rigid hollow cylinder unit under combined treatment by cutting and surface plastic deformation, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2009, no. 1 (7), pp. 124–127.Google Scholar
  4. 4.
    Maksimov, Yu.V., Ankin, A.V., and Vetrova, E.A., The dependence of cutting depth on the sectional shape vibrations under mixed machining of non-rigid tubes, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2009, no. 2 (8), pp. 188–192.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Moscow Polytechnic UniversityMoscowRussia
  2. 2.Moscow Power-Engineering InstituteMoscowRussia

Personalised recommendations