Advertisement

Russian Engineering Research

, Volume 39, Issue 2, pp 171–173 | Cite as

Basing of Surfaces of Revolution on Immobile Prisms

  • B. M. BazrovEmail author
Article

Abstract

The basing of parts with surfaces of revolution in a self-centering vise and a motionless prism is considered, for the example of a disk and a shaft. In the case of an immobile prism, violation of basing principles produces indeterminacy because of redundant reference points. That gives rise to a basing error.

Keywords:

machine parts basing contact point reference point basing configuration indeterminacy self-centering vise immobile prisms 

Notes

REFERENCES

  1. 1.
    GOST (State Standard) 21495–76: Locating and Bases in Machine Building Industry. Terms and Definitions, Moscow: Izd. Standartov, 1981.Google Scholar
  2. 2.
    Bazrov, B.M., Osnovy tekhnologii mashinostroeniya: uchebnik dlya vuzov (Fundamentals of the Theory of Machine Engineering: Manual for Higher Education Institutions), Moscow: INFRA-M, 2016.Google Scholar
  3. 3.
    Skvortsov, V.F., Osnovy tekhnologii mashinostroeniya: uchebnoe posobie (Fundamentals of the Theory of Machine Engineering: Manual), Tomsk: Tomsk. Politekh. Univ., 2012.Google Scholar
  4. 4.
    Valetov, V.A. and Murashko, V.A., Osnovy tekhnologii priborostroeniya. Uchebnoe posobie (Fundamentals of Technology of Instrumentation: Manual), St. Petersburg: S.-Peterb. Nats. Issled. Univ. Inf. Tekhnol., Mekh. Opt., 2006.Google Scholar
  5. 5.
    Bazrov, B.M., Theoretical and practical aspects of basing in manufacturing, Russ. Eng. Res., 2017, vol. 37, no. 7, pp. 568–573.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  1. 1.Blagonravov Institute of Mechanical EngineeringMoscowRussia

Personalised recommendations