Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 921–925 | Cite as

Roughness of Cylindrical Parts in Transverse Burnishing by Flat Plates

  • S. A. ZaidesEmail author
  • Fam Dak Fong
Article
  • 1 Downloads

Abstract

The use of transverse burnishing by means of flat plates for combined finishing and strengthening of cylindrical parts is considered. The influence of the compressive strain and the total number of workpiece rotations on the surface roughness is determined experimentally.

Keywords:

strengthening transverse burnishing compressive strain surface roughness cylinder 

Notes

REFERENCES

  1. 1.
    Dudnikov, I.A., Classification of the parts for quality control of their surface layer, Vost.-Evrop. Zh. Peredovykh Tekhnol., 2011, vol. 5, no. 7, pp. 10–13.Google Scholar
  2. 2.
    Dudnikov, A.A., Belovod, A.I., and Kelemesh, A.A., Quality of surface layer of the part during surface plastic deformation, Tekhnol. Audit Rezervy Proizvod., 2012, no. 1, pp. 22–25.Google Scholar
  3. 3.
    Odintsov, L.G. and Pleshakov, V.V., Quality of surface and operational properties of machine parts by diamond smoothing, Naukoemkie Tekhnol. Mashinostr., 2013, no. 1, pp. 41–48.Google Scholar
  4. 4.
    Shneider, Yu.G., Ekspluatatsionnye svoistva detalei s regulyarnym mikrorel’efom (Operational Properties of the Parts with Regular Microrelief), Leningrad: Mashinostroenie, 1982.Google Scholar
  5. 5.
    Ezhelev, A.V., Bobrovskii, I.N., and Luk’yanov, A.A., Analysis of treatment method of surface plastic deformation, Fundam. Issled., 2012, no. 6-3, pp. 642–646.Google Scholar
  6. 6.
    Smelyanskii, V.M., Mekhanika uprochneniya detalei poverkhnostnym plasticheskim deformirovaniem (Mechanics of Strengthening of the Parts by surface Plastic Deformation), Moscow: Mashinostroenie, 2002.Google Scholar
  7. 7.
    Otenii, Ya.N., Tekhnologicheskoe obespechenie kachestva detalei mashin poverkhnostnym plasticheskim deformirovaniem: monografiya (Quality Ensure of Machine Parts by Surface Plastic Deformation: Monograph), Volgograd: Politekhnik, 2005.Google Scholar
  8. 8.
    Fam, D.F., Zaides, S.A., and Nguen, V.Kh., The conditions of cross-rolling during surface plastic deformation, Vestn. Irkutsk. Gos. Tekh. Univ., 2015, no. 4, pp. 48–52.Google Scholar
  9. 9.
    Kurguzov, S.A., Krasnoperov, D.N., Krasnoperova, I.A., et al., Analysis of technology forming on the surface microrelief tribounit, Tr. Sworld, 2014, vol. 6, no. 4, pp. 45–49.Google Scholar
  10. 10.
    Leonov, O.A. and Vergazova, Yu.G., Relative support length of surface profile and Longevity of the parts, Innovatsionnaya Nauka, 2016, no. 1–2 (13), pp. 81–83.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Irkutsk National Research Technical UniversityIrkutskRussia

Personalised recommendations