Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 945–948 | Cite as

Benefits and Applications of High-Strength Titanium Alloys

  • S. V. PutyrskiiEmail author
  • A. L. Yakovlev
  • N. A. Nochovnaya
Article
  • 2 Downloads

Abstract

The benefits and applications of high-strength titanium alloys are considered. Promising avenues for the development of new alloys of this type are noted.

Keywords:

high-strength titanium alloys (α + β) titanium alloys mechanical properties 

Notes

REFERENCES

  1. 1.
    Kablov, E.N., Strategic development of the materials and technologies for their recycling until 2030, Aviats. Mater. Tekhnol., 2012, suppl., pp. 7–17.Google Scholar
  2. 2.
    Khorev, A.I., Belov, S.P., and Glazunov, S.G., Metallovedenie titana i ego splavov (Metal Science of Titanium and Its Alloys), Moscow: Metallurgiya, 1992.Google Scholar
  3. 3.
    Moiseev, V.N., High-strength titanium alloys for large parts of aircraft engines, Met. Sci. Heat Treat., 2000, vol. 42, no. 2, pp. 81–83.CrossRefGoogle Scholar
  4. 4.
    Arzamasov, B.N., Brostrem, V.A., Bushe, N.A., et al., Konstruktsionnye materialy: Spravochnik (Construction Materials: Handbook), Arzamasov, B.N., Ed., Moscow: Mashinostroenie, 1990.Google Scholar
  5. 5.
    Aviatsionnye materialy: Spravochnik (Aviation Materials: Handbook), Kablov, E.N., Ed., Moscow: Vseross. Inst. Aviats. Mater., 2010.Google Scholar
  6. 6.
    Kirilov, Yu.G., Kulikov, F.R., Moiseev, V.N., et al., Properties of welded joints of high-strength titanium alloy VT22, in Legirovanie i termicheskaya obrabotka titanovykh splavov (Alloying and thermal Treatment of Titanium Alloys), Moscow: Vseross. Inst. Aviats. Mater., 1977, pp. 159–170.Google Scholar
  7. 7.
    Khorev, A.I., Titanium alloy VT23 and its comparison with best foreign analogs, Titan, 2006, no. 1 (18), pp. 47–52.Google Scholar
  8. 8.
    Yakovlev, A.L. and Nochovnaya, N.A., Effect of thermal treatment on properties of sheets from high-strength titanium alloy VT23M, Aviats. Mater. Tekhnol., 2013, no. 4, pp. 8–13.Google Scholar
  9. 9.
    Yakovlev, A.L., Filatov, A.A., Burkhanova, A.A., et al., Effective use of titanium alloy VT23 in new products of Sukhoi Company, Titan, 2013, no. 2 (40), pp. 39–42.Google Scholar
  10. 10.
    Logachev, I.A., Razumovskii, V.I., Razumovskii, I.M., et al., Theoretical evaluation of the chemical composition of new generation heat-resistant titanium alloy and creation of the method for composition optimization of titanium alloys, Titan, 2012, no. 4 (38), pp. 27–32.Google Scholar
  11. 11.
    Khorev, A.I., Complex alloying and microalloying of titanium alloys, Svar. Proizvod., 2009, no. 6, pp. 21–30.Google Scholar
  12. 12.
    Nochovnaya, N.A. and Panin, P.V., Analysis of residual macrotensions in welded joints of different-class titanium alloys, Tr. Vseross. Inst. Aviats. Mater., 2014, no. 5, pp. 1–17.Google Scholar
  13. 13.
    Erasov, V.S., Grinevich, A.V., Senik, V.Ya., et al., Calculation of strength characteristics of aviation materials, Aviats. Mater. Tekhnol., 2012, no. 2, pp. 52–59.Google Scholar
  14. 14.
    Tarasov, Yu.M. and Antipov, V.V., New materials of the All-Russian Institute of Aviation Materials for advanced equipment of the United Aircraft Corporation, Aviats. Mater. Tekhnol., 2012, no. 2, pp. 5–6.Google Scholar
  15. 15.
    Antashev, V.G., Nochovnaya, N.A., Shiryaev, A.A., and Izotova, A.Yu., New titanium alloys, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Ser. Mashinostr., 2011, suppl. 2, pp. 60–67.Google Scholar
  16. 16.
    Khorev, A.I., Thermal treatment and welding of high-strength (α + β) titanium alloys, Tekhnol. Mashinostr., 2013, no. 8, pp. 5–11.Google Scholar
  17. 17.
    Antashev, V.G., Nochovnaya, N.A., Shiryaev, A.A., and Izotova, A.Yu., Development of new titanium alloys, Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Ser. Mashinostr., 2011, suppl. 2, pp. 60–67.Google Scholar
  18. 18.
    Kablov, E.N., Sixth technological mode, Nauka Zhizn’, 2010, no. 4, pp. 2–7.Google Scholar
  19. 19.
    Khorev, A.I., Theoretical and applied studies on construction titanium alloys and their development, Tr. Vseross. Inst. Aviats. Mater., 2013, no. 2, pp. 1–19.Google Scholar
  20. 20.
    Kablov, E.N., Materials and chemical technologies for aircraft engineering, Herald Russ. Acad. Sci., 2012, vol. 82, no. 3, pp. 158–167.CrossRefGoogle Scholar
  21. 21.
    Khorev, A.I., Nochovnaya, N.A., and Yakovlev, A.L., Microalloying of rare earth metals of titanium alloys, Aviats. Mater. Tekhnol., 2012, suppl., pp. 206–212.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • S. V. Putyrskii
    • 1
    Email author
  • A. L. Yakovlev
    • 1
  • N. A. Nochovnaya
    • 1
  1. 1.Russian Institute of Aviation MaterialsMoscowRussia

Personalised recommendations