Russian Engineering Research

, Volume 38, Issue 12, pp 1080–1083 | Cite as

Surface Hardening in Hydraulic Cylinders for Airplane Engines

  • L. V. DenisovEmail author
  • A. G. BoitsovEmail author
  • M. V. SiluyanovaEmail author


Means of increasing the reliability and durability of hydraulic cylinders for airplane engines are considered. The wear of their working surfaces may be decreased by applying a carbide–oxide coating and subsequent smoothing.


carbide–oxide coating smoothing titanium alloy hydraulic cylinder 



  1. 1.
    Boitsov, A.G., Kovalev, A.P., Novikov, A.S., et al., Protsessy mekhanicheskoi i fizikokhimicheskoi obrabotki v proizvodstve aviatsionnykh dvigatelei: uchebnoe posobie (Mechanical and Physicochemical Processing in Production of Aircraft Engines: Manual), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2007.Google Scholar
  2. 2.
    Boitsov, A.G., Mashkov, V.N., Smolentsev, V.A., and Khvorostukhin, L.A., Uprochnenie poverkhnostei detalei kombinirovannymi sposobami (Surface Hardening of the Parts by Combined Methods), Moscow: Mashinostroenie, 1991.Google Scholar
  3. 3.
    Grachev, M.V., Denisov, L.V., and Boitsov, A.G., Phase and elemental composition of the surface layer after electrospark doping, Tr. Vseross. Nauchno-Issled. Tekhnol. Inst. Remonta Ekspl. Mash. Trakt. Parka, 2010, vol. 106, pp. 47–49.Google Scholar
  4. 4.
    Boitsov, A.G., Siluyanova, M.V. and Kuritsyna, V.V., Electric-discharge milling of small airplane-engine components, Russ. Eng. Res., 2018, vol. 38, no. 7, pp. 552–556.CrossRefGoogle Scholar
  5. 5.
    Siluyanova, M.V. and Kuritsyna, V.V., Automated management in aerospace production, Russ. Eng. Res., 2018, vol. 38, no. 3, pp. 201–207.CrossRefGoogle Scholar
  6. 6.
    Siluyanova, M.V., Kuritsyna, V.V., and Boitsov, V.A., Modeli i metody tekhnologicheskogo audita naukoemkikh proizvodstv (Models and Methods of Technological Audit of Hi-Tech Industries), Moscow: Mosk. Aviats. Inst., 2017.Google Scholar
  7. 7.
    Siluyanova, M.V. and Kuritsyna, V.V., Tools for technological audit in multivariant tasks of control over hi-tech industry, Tekhnol. Tekhnosfern. Bezop., 2016, no. 1 (65), pp. 226–235.Google Scholar
  8. 8.
    Siluyanova, M.V. and Chelebyan, O.G., The method of air-fuel mixture preparing in the front module of low emission aviation combustion chamber, J. Eng. Appl. Sci., 2017, vol. 12, no. 5, pp. 1324–1330.Google Scholar
  9. 9.
    Siluyanova, M.V., Methods of designing and manufacturing a heat exchanger for the small-dimensional GTEs with heat recovery, J. Fundam. Appl. Sci., 2017, vol. 9, no. 75, pp. 925–934.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Moscow Aviation InstituteMoscowRussia

Personalised recommendations