Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 992–995 | Cite as

Influence of Aluminum Coatings on the Quality of Weld Joints

  • A. P. SychevEmail author
  • M. A. Sycheva
Article
  • 1 Downloads

Abstract

The application of a longitudinal magnetic field in welding aluminum coated sheet is considered. A special welding head is used to produce weld joints of satisfactory quality. Findings are obtained regarding the formation and metallographic structure of the metal in the seam, with the segregation of aluminum over its cross section. The formation of composite structure is noted.

Keywords:

aluminum coating weld seam longitudinal magnetic field welding head microstructure aluminum segregation melting line composite structure 

Notes

REFERENCES

  1. 1.
    Karter, V.I., Metallicheskoe protivokorrozionnye pokrytiya (Metal Anticorrosion Coatings), Leningrad: Sudostroenie, 1980.Google Scholar
  2. 2.
    Saakiyan, L.S. and Efremov, A.P., Zashchita neftegazopromyslovogo oborudovaniya ot korrozii (Corrosion Protection of Oil and Gas Equipment), Moscow: Nedra, 1982.Google Scholar
  3. 3.
    Krampit, A.G., Technological procedures and control methods of the weld formation, Tekhnol. Met., 2008, no. 11, pp. 38–43.Google Scholar
  4. 4.
    Steklov, O.I., Karmazinov, N.P., and Sycheva, M.A., The effect of sprayed aluminum on the properties of the weld metal during mechanized welding of sheet metal, Svar. Proizvod., 1988, no. 10, pp. 11–12.Google Scholar
  5. 5.
    Moravetskii, S.I., Porshenkov, N.A., and Sokirko, V.A., Specific electromagnetic effects on metals and their welded joints: a review, Avtom. Svarka, 2007, no. 6, pp. 20–26.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Southern Scientific Center, Russian Academy of Sciences, Rostov State University of TransportationRostov-on-DonRussia
  2. 2.Don State Technical UniversityRostov-on-DonRussia

Personalised recommendations