Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 968–973 | Cite as

Hardened Novikov Gears as the Last Stage of General-Purpose Gear Systems

  • V. I. KorotkinEmail author
Article
  • 4 Downloads

Abstract

The creation of general-purpose gear systems with hardened Novikov gears of relatively low precision is considered. By solving three-dimensional elastic-contact problems and modeling, the replacement of expensive high-precision involute gears in the final stage of general-purpose gear systems by less expensive hardened Novikov gears of lower precision is shown to be expedient. Preliminary calculations of prospective high-precision Novikov gears are presented. They offer considerable advantages over their involute counterparts.

Keywords:

general-purpose gear systems hardened Novikov gears gear precision 

Notes

ACKNOWLEDGMENTS

Financial support was provided by the Russian Ministry of Education and Science (project 9.4726.2017/8.9).

REFERENCES

  1. 1.
    Novikov, M.L., Zubchatye peredachi s novym zatsepleniem (Gears with New Gearing), Moscow: Voen.-Vozdushn. Inzh. Akad. im. N.E. Zhukovskogo, 1958.Google Scholar
  2. 2.
    Veretennikov, V.Ya., Korotkin, V.I., and Boldyreva, L.G., Analysis of Novikov nitrocemented cylindrical gears for general purpose gearboxes, Vestn. Mashinostr., 1984, no. 6, pp. 21–23.Google Scholar
  3. 3.
    GOST (State Standard) 30224–96: Novikov Cilindrical Gears with Hardness of Teeth Surface not Less 35 HRC, Basic Rack, Moscow: Izd. Standartov, 1996.Google Scholar
  4. 4.
    Korotkin, V.I., Onishkov, N.P., and Kharitonov, Yu.D., Novikov Gearing: Achievements and Developments (Mechanical Engineering Theory and Applications), New York: Nova Science, 2011.Google Scholar
  5. 5.
    Korotkin, V.I., Evaluation of efficiency of longitudinal surface modification teeth of Novikov spur gears with standard basic rack profile according to GOST 30224–96, Spravochnik. Inzh. Zh., 2015, no. 12, pp. 14–20.Google Scholar
  6. 6.
    Korotkin, V.I. and Onishkov, N.P., The efficiency due to the increase module of Novikov gearing with standard basic rack profiles, Tekhn. Mashinostr., 2015, no. 2, pp. 37–44.Google Scholar
  7. 7.
    GOST (State Standard) 14186–69: Novikov Spur Gears. Modules, Moscow: Izd. Standartov, 1969.Google Scholar
  8. 8.
    Roslivker, E.G., Durability and rigidity of gear teeth with Novikov gearing, in Prochnost’ korpusov sudov i nadezhnost’ detalei mashin (Durability of Ship Hulls and Reliability of Machine Parts), Tr. Gor’k. Inst. Inzh. Vodn. Transp., Gorkiy: Gor’k. Inst. Inzh. Vodn. Transp., 1975, no. 138, pp. 50–96.Google Scholar
  9. 9.
    Korotkin, V.I. and Gazzaev, D.A., Simulation of contact interaction of gear wheel teeth of novikov gearing, Vestn. Mashinostr., 2014, no. 11, pp. 31–35.Google Scholar
  10. 10.
    Korotkin, V.I. and Gazzaev, D.A., Bending intensity of teeth under the influence of a distributed load in different phases of Novikov gearing, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 2, pp. 104–111.CrossRefGoogle Scholar
  11. 11.
    Korotkin, V.I., Gazzaev, D.A., and Onishkov, N.P., Phase movement of the teeth of the wheels of Novikov spur gears, Tekhn. Mashinostr., 2014, no. 2, pp. 33–38.Google Scholar
  12. 12.
    Korotkin, V.I., Comparative analysis of teeth strength and load capacity of Novikov spur gears and involute gears, Vestn. Mashinostr., 2016, no. 9, pp. 38–43.Google Scholar
  13. 13.
    GOST (State Standard) 21354–87: Cylindrical Involute Gears of External Engagement. Strength Calculation, Moscow: Izd. Standartov, 1988.Google Scholar
  14. 14.
    Korotkin, V.I., Tsilindricheskie evol’ventnye zubchatye peredachi s lokal’nym kontaktom zob’ev nagruzochnoi sposobnosti (Spur Involute Gears with Local Teeth Contact of higher Loading Capacity), Rostov-on-Don: Yuzh. Fed. Univ., 2013.Google Scholar
  15. 15.
    Reduktory i motor-reduktory. Katalog (Gearboxes and Gearmotors: Catalogue), Moscow: Vseross. Nauchno-Issled. Inst. Inf. Tekh.-Ekon. Issled. Mashinostr. Robototekh., 1987, part 1.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Southern Federal UniversityRostov-on-DonRussia

Personalised recommendations