Advertisement

Russian Engineering Research

, Volume 38, Issue 12, pp 1022–1025 | Cite as

Control of the Machining Precision in Thread Cutting

  • M. Z. KhostikoevEmail author
  • V. A. Timiryazev
  • E. M. Orlov
Article
  • 2 Downloads

Abstract

In research on thread cutting, the flaws inevitably arising in the first two and last two turns of the thread, when the process is unsteady, are analyzed. Specifically, insertion and removal of the tool from the workpiece are accompanied by abrupt change in thread diameter: abrupt decrease in the case of threads on shafts; and increase for threads in holes. That leads to the appearance of slots on assembly, thereby increasing the likelihood of accidents and other problems in thread operation. A method of eliminating such gaps is proposed and tested: control of the machining precision in the course of thread cutting. In particular, the thread diameter and pitch are controlled by compensation of the axial and radial elastic displacements of the tool, based on timely correction of the transverse and longitudinal supply during the unsteady stage of the process. Compensation of the machining errors improves the dimensional precision of the thread and decreases the systematic errors and spread in the thread dimensions.

Keywords:

thread cutting flaws thread precision precision control elastic tool displacement compensation correction 

Notes

REFERENCES

  1. 1.
    Borovskoi, G.V., Razvitie mashinostroeniya Rossii na osnove tekhnologicheskogo perevooruzheniya (Development of Machine Engineering in Russia Based on Technological Optimization), Moscow: Instrumenty, Tekhnologiya, Oborudovanie, 2009.Google Scholar
  2. 2.
    Timiryazev, V.A., Khostikoev, M.Z., and Skhirtladze, A.G., Osnovy tekhnologii mashinostroeniya (Fundamental Technology of Machine Engineering), Moscow: Neft’ i Gaz, 2016.Google Scholar
  3. 3.
    Grechishnikov, V.A., Nauka i iskusstvo sistemnogo modelirovaniya instrumental’nogo obespecheniya mashinostroitel’nykh proizvodstv (Science and Art of System Modeling of Instrumental Support of Machine Engineering Industry), Moscow: Kursk, 2016.Google Scholar
  4. 4.
    Kuznetsov, A.M. and Orlov, E.M., Dynamics and errors in processing of instable threading process, Trudy XXXIX mezhdunarodnoi nauchno-tekhnicheskaya konferentsii Assotsiatsii Avtomobil’nykh Inzhenerov (Proc. XXXIX Int. Sci.-Tech. Conf. of Automotive Engineers Association), Moscow: Mosk. Gos. Tekh. Univ., MAMI, 2002.Google Scholar
  5. 5.
    Timiryazev, V.A. and Khostikoev, M.Z., Automatic assessment of cutting tools on multipurpose machines, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2011, no. 1 (11), pp. 198–202.Google Scholar
  6. 6.
    Khostikoev, M.Z., Golobova, A.A., and Chertov, F.N., Computer automated reduction of the installation error of the cutting tool on multipurpose machines, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2011, no. 4 (17), pp. 43–45.Google Scholar
  7. 7.
    Khostikoev, M.Z., Control of tool geometry during machining, Gorn. Inf.-Anal. Byull., 2011, no. 4, pp. 319–321.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • M. Z. Khostikoev
    • 1
    Email author
  • V. A. Timiryazev
    • 2
  • E. M. Orlov
    • 3
  1. 1.Gubkin Russian State University of Oil and GasMoscowRussia
  2. 2.Stankin Moscow State Technical UniversityMoscowRussia
  3. 3.OOO IntekhnikaMoscowRussia

Personalised recommendations