Advertisement

Investigation into the Process of Electrolysis Borating of Steel Parts

  • V. N. Builov
  • I. V. Lyulyakov
Article
  • 9 Downloads

Abstract

The paper presents the results of experimental studies on how electrolysis borating and the steel grade of hardenable parts affects the boron and carbon distribution in the bulk of the diffusion layer. The structure, phase composition, boron and carbon concentration over the thickness of the hardened layer, and boride coating properties are examined. The optimal values of the initial carbon concentration are obtained. The optimal technological modes of the hardening process are determined, which makes it possible to develop a surface with minimum wear rate in abrasive environments.

Keywords

electrolysis borating abrasion wear hardening surface regime concentration phase 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Voroshnin, L.G. and Lyakhovich, L.S., Borirovanie stali (Boronizing of Steel), Moscow: Metallurgiya, 1978.Google Scholar
  2. 2.
    Kukhareva, N.G., Galynskaya, N.A., and Petrovich, S.N., Nauka Tekh., 2013, no. 5, pp. 21–26.Google Scholar
  3. 3.
    Dombrovskii, Yu.M. and Stepanov, M.S., Izv. Volgograd. Gos. Tekh. Univ., 2014, 10, no. 23, pp. 41–42.Google Scholar
  4. 4.
    Shadrichev, E.V. and Ivanov, A.E., Met. Sci. Heat Treat., 1984, vol. 26, no. 3, pp. 235–239.CrossRefGoogle Scholar
  5. 5.
    Balter, M.A., Uprochnenie detalei mashin (Hardening of Machine Parts), Moscow: Mashinostroenie, 1968.Google Scholar
  6. 6.
    Lakhtin, Yu.M., Metallovedenie i termicheskaya obrabotka metallov (Metal Science and Thermal Processing of Metals), Moscow: Mashinostroenie, 1983.Google Scholar
  7. 7.
    Lyulyakov, I.V., Agrar. Nauch. Zh., 2007, no. 5, pp. 46–51.Google Scholar
  8. 8.
    Kragel’skii, I.V., Dobychin, M.N., et al., Osnovy rascheta na trenie i iznos (Basic Calculation of Friction and Wear), Moscow: Mashinostroenie, 1977.Google Scholar
  9. 9.
    Baraboshkin, A.N., Elektrokristallizatsiya metallov iz rasplavlennykh solei (Electrical Crystallization of Metals from Melted Salts), Moscow: Nauka, 1976.Google Scholar
  10. 10.
    Builov, V.N. and Lyulyakov, I.V., Agrar. Nauch. Zh., 2007, no. 4, pp. 23–25.Google Scholar
  11. 11.
    Builov, V.N. and Lyulyakov, I.V., Mekh. Elektrif. Sel’sk. Khoz., 2003, no. 4, pp. 31–32.Google Scholar
  12. 12.
    Gorelik, S.S., Skakov, Yu.A., and Rastorguev, L.N., Rentgenograficheskii i elektronno-opticheskii analiz (Xray and Electron-Optical Analysis), Moscow: Mosk. Inst. Stali Splavov, 1994.Google Scholar
  13. 13.
    Lebedev, A.T., Mass-spektrometriya v organicheskoi khimii (Mass Spectrometry Analysis in Organic Chemistry), Moscow: Tekhnosfera, 2015.Google Scholar
  14. 14.
    Afanas’ev, A.A., Stativko, A.A., and Glotov, S.A., Vestn. Khar’k. Nats. Avtomob.-Dorozhn. Univ., 2010, no. 51, pp. 20–25.Google Scholar
  15. 15.
    Segers, L., Fontana, A., and Winand, R., Electrochim. Acta, 1991, vol. 36, no. 1, pp. 41–47.CrossRefGoogle Scholar
  16. 16.
    Gur’ev, A.M., Lygdenov, B.D., Ivanov, S.G., Sitnikov, A.A., et al., Sovrem. Naukoemkie Tekhnol., 2014, no. 4, pp. 60–62.Google Scholar
  17. 17.
    Lukin, A.A., Lukin, O.A., and Molyakov, I.Yu., Vestn. Voronezh. Gos. Tekhn. Univ., 2012, vol. 8, no. 7, pp. 62–64.Google Scholar
  18. 18.
    Kartal, G., Eryilmaz, O.L., Krumdick, G., Erdemir, A. et al. Appl. Surf. Sci., 2011, vol. 257, no. 15, pp. 6928–6934.CrossRefGoogle Scholar
  19. 19.
    Builov, V.N., Agrar. Nauch. Zh., 2007, no. 5, pp. 37–40.Google Scholar
  20. 20.
    Kvashin, B.N., Vestn. Voronezh. Gos. Tekhn. Univ., 2011, vol. 7, no. 9, pp. 96–97.Google Scholar
  21. 21.
    Rile, M., Met. Sci. Heat Treat., 1974, vol. 16, no. 10, pp. 836–838.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Saratov State Vavilov Agrarian UniversitySaratovRussia

Personalised recommendations