Russian Electrical Engineering

, Volume 89, Issue 11, pp 670–674 | Cite as

Parametric Identification of an Induction Motor Based on a Phase-Locked-Loop Frequency Control Algorithm

  • E. M. SolodkiiEmail author
  • D. A. Dadenkov
  • A. M. Kostygov


A method of identification of induction motor parameters based on a phase-locked loop frequency control algorithm was considered. The existing identification methods of the equivalent circuit parameters were analyzed and classified. The methods operating in real time and in the adaptation mode of electric drive during the first operative startup of electric drive were distinguished. In addition, using the methods of active identification, in which an additional test information signal is injected into the power circuit of an electric drive, is unacceptable during electric drive operation and they are used at the time of prior adjustment of electric drive until its operative startup or for a short time to adaptation of changing parameters. An evaluation algorithm of motor parameters was proposed, and functional and structural diagrams of parametric identification system were developed. The developed identification method based on a phase-locked loop frequency control algorithm is constructed upon leveling of the phase difference between the real (measured) stator current vector and the stator current vector calculated by the model. The simulation results of the implemented parametric identification system are presented. According to the results of model experiments, the error of estimation of motor parameters did not exceed 1%. The proposed parametric identification system can be used as part of a vector control system to determine the coefficients of internal regulators of electric drives.


induction motor identification of parameters equivalent circuit estimation algorithm model 



  1. 1.
    Kashirskikh, V.G. and Zav’yalov, V.M., Real-time determination of active resistance and flux linkage of the rotor of induction engine during steady-state operation, Vestn. Kuzbassk. Gos. Tekh. Univ., 2003, no. 1.Google Scholar
  2. 2.
    Vodovozov, A.M. and Elyukov, A.S., Identification of the parameters of an asynchronous machine in steady state regime, Vestn. Ivanovsk. Gos. Energ. Univ., 2003, no. 3.Google Scholar
  3. 3.
    Odnol’ko, D.S., Algorithm for identification of electromagnetic parameters of an asynchronous machine during operation of a three-phase electric circuit, Izv. Vyssh. Uchebn. Zaved. Energ. Ob’edin. SNG, Energ., 2013, no. 1.Google Scholar
  4. 4.
    Odnol’ko, D.S., The evaluation algorithm of the active stator resistance of an induction motor with a stationary rotor, Izv. Vyssh. Uchebn. Zaved. Energ. Ob’edin. SNG, Energ., 2012, no. 2.Google Scholar
  5. 5.
    Vinogradov, A.B., Kolodin, I.Yu., and Sibirtsev, A.N., Adaptive-vector control system of sensorless asynchronous electric drive of EPV series, Silovaya Elektron., 2006, no. 3.Google Scholar
  6. 6.
    Dadenkov, D.A., Solodkii, E.M., and Shachkov, A.M., Simulation of asynchronous motor vector control system in Matlab Simulink package, Vestn. Permsk. Nats. Issled. Politekh. Univ., Elektrotekh., Inf. Tekhnol., Sist. Uprav., 2014, no. 3 (11).Google Scholar
  7. 7.
    Usol’tsev, A.A., Determination of the parameters of the replacement circuit of an inductive engine using the reference data. pdf. Accessed November 3, 2016.Google Scholar
  8. 8.
    Andreev, M.A. and Vodovozov, A.M., Identification of the parameters of the asynchronous electric drive by transients in the power circuit, Nauchno-Tekh. Ved. S.‑Peterb. Gos. Politekh. Univ., Ser. Nauka Obraz., 2010, no. 4.Google Scholar
  9. 9.
    Emara, H.M., Elshamy, W., and Bahgat, A., Parameter identification of induction motor using modified Particle Swarm Optimization algorithm, 2008 IEEE Int. Symp. on Industrial Electronics (ISIE 2008), Piscataway, NJ: Inst. Electr. Electron. Eng., 2008.Google Scholar
  10. 10.
    Sinchuk, O.N., Zakharov, V.Yu., Sinchuk, I.O., and Smenova, L.V., Identification of electrical parameters of traction asynchronous engines of electric locomotives, Elektrotekh. Kompyu’yut. Sist., 2013, no. 10 (86).Google Scholar
  11. 11.
    Maslov, M.O. and Pankratov, V.V., An algorithm of preliminary identification of the parameters for the asynchronous electric drive with vector control, Trudy XIII mezhdunarodnoi konferentsii “Elektroprivody peremennogo toka” (Proc. XIII Int. Conf. “Electric Drives of Alternating Current”), Yekaterinburg, 2005.Google Scholar
  12. 12.
    Braslavskii, I.Ya., Ishmatov, Z.Sh., and Barats, E.I., Adaptive system for direct control of the asynchronous motor moment, Elektrotekhnika, 2001, no. 11.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • E. M. Solodkii
    • 1
    Email author
  • D. A. Dadenkov
    • 1
  • A. M. Kostygov
    • 1
  1. 1.Perm National Research Polytechnic UniversityPermRussia

Personalised recommendations