Journal of Friction and Wear

, Volume 39, Issue 6, pp 457–461 | Cite as

Sintered Copper-Based Powder Friction Material Filled with Fullerene-Like Glass Carbon

  • A. F. Il’yushchenko
  • A. V. LeshokEmail author
  • A. N. Rogovoi


Existing compositions of sintered copper-based powder friction materials have been analyzed. It has been indicated that these materials, which operate under lubricating conditions, usually contain fine pencil-type or coarse casting graphite as an antiseize additive. As a friction additive, oxide and carbide powders and other high-melting materials are used. In this work, the results of investigations of tribotechnical properties of the sintered powder friction material based on copper filled with glass carbon are given. It is shown that its use provides an increase in the friction coefficient of the material with a decrease in wear over the period of its operation.


friction disc glass carbon steel disc friction material friction wear friction coefficient 



  1. 1.
    Il’yushchenko, A.F., Rogovoi, A.N., Dmitrovich, A.A., and Leshok, A.V., Sintered frictional materials, in Poroshkovaya metallurgiya v Belarusi: vyzovy vremeni (Powder Metallurgy in Belarus: New Challenges), Il’yushchenko, A.F., Ed., Minsk: Belarusskaya Navuka, 2017, pp. 113–121.Google Scholar
  2. 2.
    Pierson, H.O., Handbook of Carbon, Graphite, Diamond and Fullerenes: Processing, Properties and Applications, Park Ridge, NJ: Noyes, 1993.Google Scholar
  3. 3.
    Larionova, N.S., Nikonova, R.M., and Ladyanova, V.I., Mechanosynthesis of nanostructured composites copper-fullerite, copper-graphite, Adv. Powder Technol., 2018, no. 29, no. 2, pp. 399–406.Google Scholar
  4. 4.
    Il’yushchenko, A.F., Leshok, A.V., Rogovoi, A.N., and Rudakovskii, V.O., Use of sintered powder material FM-15 in the clutch of Belarus-3522 tractors, Aktual. Vopr. Mashinoved., 2016, no. 5, p. 165.Google Scholar
  5. 5.
    Shapovalova, O.A., Tarasik, V.P., Romanovich, Yu.S., and Leshok, A.V., Mechanical and thermal loading of clutches of hydromechanical transmission, Avtomob. Prom-st., 2014, no. 2, p. 15.Google Scholar
  6. 6.
    Borisov, A.M., Ion-induced processes and analysis of the surface layer under high-dose irradiation of metals and carbon-graphite materials, Extended Abstract of Doctoral (Phys.-Math.) Dissertation, Moscow, 2005.Google Scholar
  7. 7.
    Borisov, A.M., Virgil’ev, Yu.S., Mashkova, E.S., Nemov, A.S., Pitirimova, E.A., and Khokhlov, A.F., Ion-induced structural changes in glass carbon, Vopr. At. Nauki Tekh., Ser.: Termoyad. Sint., 2003, no. 1, pp. 8–14.Google Scholar
  8. 8.
    Holmén, G., Svensson, B., and Burén, A., Ion induced electron emission from polycrystalline copper, Nucl. Instrum. Methods Phys. Res., 1981, vol. 185, nos. 1–3, pp. 523–532.ADSCrossRefGoogle Scholar
  9. 9.
    Il’yushchenko, A.F., Dmitrovich, A.A., and Leshok, A.V. Studying microprofile of surface of steel disc that operates in various friction units in a pair with MK-5 metal-ceramic frictional material, J. Frict. Wear, 2014, vol. 35, no. 3, pp. 181–187.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • A. F. Il’yushchenko
    • 1
  • A. V. Leshok
    • 1
    Email author
  • A. N. Rogovoi
    • 1
  1. 1.Institute of Powder MetallurgyMinskBelarus

Personalised recommendations