Advertisement

Coke and Chemistry

, Volume 61, Issue 7, pp 262–265 | Cite as

Modification of Electrode Pitch

  • E. I. MalyiEmail author
CHEMISTRY
  • 9 Downloads

Abstract

The phenolic fraction of coal tar may be used to modify the group composition and rheology of pitch, according to the results of the present study. Modification of electrode pitch with a softening temperature of 55°C changes the group composition of the β fraction. That improves characteristics such as the sorptional capacity, limiting wetting angle, and wetting index. Theoretical and practical research shows that introducing 15–20% of the phenolic fraction in 1000 g of pitch improves its plasticity. The processes responsible for the characteristics of pitch in each technological step are studied. The thermochemical transformations of the pitch components with coal tar at low levels of pyrolysis are identified. By this means, the group composition of coal pitch may be modified.

Keywords:

electrode pitch phenolic fraction pitch modification group composition rheology 

Notes

REFERENCES

  1. 1.
    Golovko, M.B., Drozdnik, I.D., Miroshnichenko, D.V., and Kaftan, Yu.S., Predicting the yield of coking byproducts on the basis of elementary and petrographic analysis of the coal batch, Coke Chem., 2012, vol. 55, no. 6, pp. 204–214.CrossRefGoogle Scholar
  2. 2.
    Golovko, M.B., Miroshnichenko, D.V., and Kaftan, Yu.S., Predicting the coke yield and basic coking byproducts: an analytic review, Coke Chem., 2011, vol. 54, no. 9, pp. 331–338.CrossRefGoogle Scholar
  3. 3.
    Rubchevskii V.N., Chernyshev, Yu.A., Ovchinnikova, S.A., et al., Predicting the yield of coke and coking byproducts, Coke Chem., 2009, vol. 52, no. 4, pp. 137–142.CrossRefGoogle Scholar
  4. 4.
    Miroshnichenko, D.V. and Golovko, M.B. Predicting the yield of coke and its byproducts on the basis of elementary and petrographic analysis, Coke Chem., 2014, vol. 57, no. 3, pp. 117–128.CrossRefGoogle Scholar
  5. 5.
    Plevin, G.V., Research in the field of impregnation of carbon-graphite materials with oil and coal pitches, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Ufa, 1975.Google Scholar
  6. 6.
    Plevin, G.V., Sycheva, L.I., Borisova, N.N., et al., Influence of impregnation by pitch on the change in the qualitative characteristics of electrodes for higher current densities, in Proizvodstvo uglerodnykh materialov (Production of Carbon Materials), Moscow: Metallurgiya, 1981, pp. 22–26.Google Scholar
  7. 7.
    Skripchenko, N.P., Pityulin, I.N., Cheshko, F.F., and Prokhach, E.E., Theoretical prerequisites for the impregnation in the production of graphitized electrodes, Uglekhim. Zh., 2006, nos. 5–6, pp. 56–63.Google Scholar
  8. 8.
    Chalykh, E.F., Tekhnologiya i oborudovanie elektrodnykh i elektrougol’nykh predpriyatii (Technology and Equipment of Electrode and Electrocoal Enterprises), Moscow: Metallurgiya, 1972.Google Scholar
  9. 9.
    Plevin, G.V., Sycheva, L.I., Borisova, N.N., et al., Results of pilot-industrial tests of special impregnating pitch, Materialy VI Vsesoyuznoi nauchno-tekhnicheskoi konferentsii elektrodnoi promyshlennosti “Puti uskoreniya nauchno-tekhnicheskogo proressa proizvodstva uglerodnoi produktsii” (Proc. VI All-Union Sci.-Tech. Conf. of Electrode Industries “Acceleration of Scientific-Technical Progress of Carbon Production Industry”), Chelyabinsk: Gos. Nauchno-Issled. Inst. Elektrod. Prom., 1988, pp. 12.Google Scholar
  10. 10.
    Pityulin, I.N., Nauchno-tekhnologicheskie osnovy sozdaniya kamennougol’nykh uglerodosoderzhashchikh materialov dlya krupnogabaritnykh elektrodov (Scientific- Technological Basis for Creation of Coal Carbonaceous Materials for Large Electrodes), Kharkov: Kontrast, 2004.Google Scholar
  11. 11.
    Gogoleva, T.Ya. and Shustikov, V.I., Khimiya i tekhnologiya pererabotki kamennougol’noi smoly (Chemistry and Technology of Coal Tar Processing), Moscow: Metallurgiya, 1992.Google Scholar
  12. 12.
    Vlasov, G.A., Chuishchev, V.M., Saranchuk, V.I., et al., Quality optimization of coal tar pitch at Avdeevskii Coke Plant, Nauk. Prats. Donsk. Nats. Tekh. Univ., Ser.: Khim. Khim. Tekhnol., 2002, no. 43, pp. 30–35.Google Scholar
  13. 13.
    Kozlov, P.V. and Papkov, S.P., Fiziko-khimicheskie osnovy plastifikatsii polimerov (Physical-Chemical Basis of Plasticization of Polymers), Moscow: Khimiya, 1982.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.Ukrainian National Metallurgical AcademyDneprUkraine

Personalised recommendations