Advertisement

Russian Journal of Non-Ferrous Metals

, Volume 59, Issue 6, pp 677–684 | Cite as

Development of the Aluminum Powder Composite Based on the Al–Si–Ni System and Technology of Billet Fabrication of This Composite

  • V. V. VasenevEmail author
  • V. N. Mironenko
  • V. N. Butrim
  • O. E. Osintsev
  • S. Ya. BetsofenEmail author
REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS
  • 5 Downloads

Abstract

Results of an investigation into the development of the composition and fabrication technology of compact billets of the aluminum powder composite material based on the Al–Si–Ni system for space-rocket hardware are presented. The composite production was performed as follows: initially the powder of the matrix alloy is prepared by gas sputtering, and then a mixture of the matrix alloy powder and alloying dispersed additives is subjected to mechanical alloying in high-energy apparatuses. The method of degassing the mechanically alloyed composition in a thin layer (in order to exclude material ejection from a container when degassing a larger volume of powder) and process regimes of composition compaction are developed using the unique equipment available at OAO Kompozit (Korolev, Moscow oblast)—a vacuum press. Using this technology, cylindrical briquettes up to 100 mm in diameter and up to 120 mm in height are fabricated. Newly developed and patented Kompal-301 composite material has substantial advantages over SAS-1-50 power alloy applied for similar purposes. Its thermal linear expansion coefficient is lower by a factor of 1.5, while the precision limit of elasticity is higher by a factor of 2–3 upon similar strength characteristics. The final structure of a compact briquette is a matrix in which dispersed particles of excess silicon are distributed rather uniformly against the background of the aluminum solid solution. Coarser isolated silicon particles are met in separate regions of the structure. Unfortunately, they are the cause of low plasticity of briquettes, which prevents the formation of semifinished products by plastic deformation; however, such low plasticity does not immediately negatively affect the fabrication of the briquettes themselves.

Keywords:

rapid crystallization mechanically alloyed powder aluminum alloy of the Al–Si–Ni system vacuum press degassing phase composition and structure physical and mechanical properties 

Notes

REFERENCES

  1. 1.
    Dobatkin, V.I., Elagin, V.I., and Fedorov, V.M., Bystrozakristallizovannye alyuminievye splavy (Rapidly Quenched Aluminum Alloys), Moscow: VILS, 1995.Google Scholar
  2. 2.
    Fridlyander, I.N., Sozdanie, issledovanie i primenenie alyuminievykh splavov. Izbrannye trudy k 100-letiyu so dnya rozhdeniya (Development, Investigation, and Application of Aluminum Alloys. Selected Works to the 100th Birthday Anniversary), Kablov, E.N., Ed., Moscow: Nauka, 2013.Google Scholar
  3. 3.
    Bondarev B.N., Shmakov Y.V., Zenina M.V. Wear-resistant alloys of the Al–Si system with reduced TLEC, in: Tekhnologiya obrabotki legkikh splavov (Processing Technology of Light Alloys], Moscow: VILS, 1994, pp. 202–204.Google Scholar
  4. 4.
    Zuo, M., Zhao, D., Teng, X., Geng, H., and Zhang, Zh., Effect of P and Sr complex modification on Si phase in hypereutectic Al–30Si alloys, Mater. Design, 2013, vol. 47, pp. 857–864.CrossRefGoogle Scholar
  5. 5.
    Gao, B., Hu, L., Li, Sh., Hao, Y., Zhang, Y., Tu, G., and Grosdidier, Th., Study on the nanostructure formation mechanism of hypereutectic Al–17.5Si alloy induced by high current pulsed electron beam, Appl. Surf. Sci., 2015, vol. 15, pp. 147–157.CrossRefGoogle Scholar
  6. 6.
    Rao, A.G., Deshmukh, V.P., Prabhu, N., and Kashyap, B.P., Ductilizing of a brittle as-cast hypereutectic Al–Si alloy by friction stir processing, Mater. Lett., 2015, vol. 159, pp. 417–419.CrossRefGoogle Scholar
  7. 7.
    Kotadia, H.R. and Das, A., Modification of solidification microstructure in hypo- and hyper-eutectic Al–Si alloys under high-intensity ultrasonic irradiation, J. Alloys Compd., 2015, vol. 620, pp. 1–4.CrossRefGoogle Scholar
  8. 8.
    Li, Q., Xia, T., Lan, Y., Li, P., and Fan, L., Effects of rare earth Er addition on microstructure and mechanical properties of hypereutectic Al–20% Si alloy, Mater. Sci. Eng., 2013, vol. 558, pp. 97–102.CrossRefGoogle Scholar
  9. 9.
    Cui, C., Schulz, A., Schimanski, K., and Zoch, H.-W., Spray forming of hypereutectic Al–Si alloys, J. Mater. Proces. Technol., 2009, vol. 209, pp. 5220–5228.CrossRefGoogle Scholar
  10. 10.
    Svoistva elementov (Properties of Elements), Drid, M.E., Ed., Moscow: Metallurgiya, 1993.Google Scholar
  11. 11.
    Belov, N.A., Eskin, D.G., and Aksenov, A.A., Multicomponent Phase Diagrams: Application for Commercial Aluminum Alloys, Elsevier, 2005.Google Scholar
  12. 12.
    Belov, N.A., Eskin, D.G., and Avxeutieva, N.N., Constituent phase diagrams of the Al–Cu–Fe–Mg–Ni–Si system and their application to the analysis of aluminium piston alloys, Acta Mater., 2005, no. 53, pp. 4709–4712.Google Scholar
  13. 13.
    Aluminium. Properties and Physical Metallurgy, Hatch, J.E., Ohio: ASM, 1984.Google Scholar
  14. 14.
    Belov, N.A., Aksenov, A.A., and Eskin, D.G., Iron in Aluminum Alloys: Impurity and Alloing Element, CSR, 2002.Google Scholar
  15. 15.
    Vasenev, V.V., Kvitka, E.V., Mironenko, V.N., Popov, A.V., and Shmakov, Y.V., Microplastic deformation resistance of Al–Si powder composites, Deform. Razrush. Mater., 2008, no. 8, pp. 41–44.Google Scholar
  16. 16.
    Diagrammy sostoyaniya dvoinykh metallicheskikh system: Spravochnik (Phase diagrams of binary metallic systems. Handbook), Lyakishev, N.P., Ed., Mashinostroenie, 1996, vol. 1.Google Scholar
  17. 17.
    Kulikov, I.S., Termodinamika karbidov i nitridov. Spravochnoe izdanie (Thermodynamics of Carbides and Nitrides: Reference Book), Chelyabinsk: Metallurgiya, 1988.Google Scholar
  18. 18.
    Mironenko, V.N., Petrovich, S.Y., Cherepanov, V.P., Okunev, S.A., and Vasenev, V.V., RF Patent 2353689, 2006.Google Scholar
  19. 19.
    Aksenov, A.A., Composition and structure optimization of Al- and Cu-based composites produced by liquid-phase methods and mechanical alloying, Extended Abstract of Doctoral (Eng.) Dissertation, Moscow: MISiS, 2007.Google Scholar
  20. 20.
    Aksenov, A.A., Solonin, A.N., and Istomin-Kastrovskii, V.V., Structure and properties of aluminum-based composite materials fabricated by mechanical alloying in air, Izv. Vyssh. Uchebn. Zaved. Tsvet. Metall., 2004, no. 4, pp. 58–66.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  1. 1.OAO KompozitKorolevRussia
  2. 2.Moscow Aviation Institute (National Research University)MoscowRussia

Personalised recommendations