Abstract
Analytical expressions for the calculation of drawing stress and the optimal channel angle of the drawing tool, making it possible to operatively evaluate the influence of various manufacturing factors on the energy-power parameters of the process and on the longitudinal stresses in the layers of bimetallic composite, are derived for designing the drawing process of bimetallic wares. Disadvantages of the proposed formulas are noted.
Similar content being viewed by others
References
Makovskii, V.A. and Eil’man, L.S., Osnovy teorii i praktiki proizvodstva bimetallicheskikh prutkov (Foundations of Theory and Practice of Production of Bimetallic Rods), Moscow: Metallurgiya, 1971.
Perlin, I.L. and Ermanok, M.Z., Teoriya volocheniya (Drawing Theory), Moscow: Metallurgiya, 1971.
Dzhonson, U. and Mellor, P., Teoriya plastichnosti dlya inzhenerov (Plasticity Theory for Engineers), Moscow: Mashinostroenie, 1979.
Kolmogorov, G.L., Chernova, T.V., and Filippov, B.V., Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2007, no. 4, pp. 41–44.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Trofimov, T.V. Kuznetsova, D.S. Anishchuk, A.V. Eseneev, M.G. Shtutsa, 2013, published in Izvestiya VUZ. Tsvetnaya Metallurgiya, 2013, No. 6, pp. 19–23.
About this article
Cite this article
Trofimov, V.N., Kuznetsova, T.V., Anishchuk, D.S. et al. Optimal geometry of the channel of the drawing tool when deforming bimetallic composites. Russ. J. Non-ferrous Metals 55, 26–30 (2014). https://doi.org/10.3103/S1067821214010167
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821214010167